HYDRAULIC BALL VALVES ❚ GHP 2-WAY HIGH PRESSURE BALL VALVES Carbon Steel ❚ STANDARD COMPOSITION OF VALVE Type: ball valve 2 way Sizes: from DN13 up to DN100 Ends: BSP-NPT Pressure: up to PN370 Temp range: from -20°C to +100°C • Treatment: Galvanized Stainless Steel • • • • • Type: ball valve 2 way Sizes: from DN13 up to DN100 Ends: BSP-NPT Pressure: up to PN370 Temp range: from -30°C to +100°C Body Adapter Ball Stem Ball seat Handle Washer Washer Stem ring Pin Seeger Adapter o-ring Stem o-ring Screw Caps Stainless Steel MATERIAL

HYDRAULIC BALL VALVES ❚ CODE DESCRIPTION STRUCTURE GHP Type and way of valve GHP 2-way Ends GAS DIN/ ISO 228 BSP Size from DN13 to DN100 Body Material ● 2 = 1,0570 ● 4 = 1,4404 Adapter material ● 2 = 1,0570 ● 4 = 1,4404 Stem material ● 4 = 1,4404 M = 1,4542 ● 4 = 1,4404 M = 1,4542 Ball Material ● 4 = 1,4404 ● 4 = 1,4404 Seat material A = POM D = PEEK* G = PA612* K = GEMPTFE* C = PTFE* Seal material B = NBR E = FKM* F = EPDM* L = MVQ* *On request • Reduced bore • Special threads • Pressure class up to PN42 MPa • Pneumatic and electrical actuator • Security block • Locking device For further special...

HYDRAULIC BALL VALVES mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch The company reserves the right to operate dimensional changes without prior notice. Carbon Steel Stainless Steel

HYDRAULIC BALL VALVES mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch Carbon Steel Stainless Steel The company reserves the right to operate dimensional changes without prior not