HYDRAULIC BALL VALVES ❚ GE3 HC 3-WAY HIGH PRESSURE BALL VALVES Carbon Steel ❚ STANDARD COMPOSITION OF VALVE • Type: ball valve 3 way high cycles • Sizes: from DN10 up to DN25 • Ends: BSP-NPT-SAE • O-Rings: NBR, FKM, EPDM, MVQ • Pressure: up to PN500 • Temp range: -20°C to +100°C • Treatment: Galvanized Stainless Steel Carbon Steel Stainless Steel Seeger Stem o-ring Stem o-ring Adapter o-ring Stem quad-ring Stem Back-up Stem Back-up Pin Caps • Type: ball valve 3 way high cycles • Sizes: from DN10 up to DN25 • Ends: BSP-NPT-SAE • O-Rings: NBR, FKM, EPDM, MVQ • Pressure: up to PN500 • Temp range: -30°C to +100°C Carbon Steel Stainless Steel

HYDRAULIC BALL VALVES ❚ CODE DESCRIPTION STRUCTURE GE3 HC G 1/2 DN13 Type and way of valve GE3 HC 3-way Ends GAS DIN/ ISO 228 BSP Size DN10 DN13 DN20 DN25 Body Material ● 1 = 1,0737 ● 4 = 1,4404 Adapter material ● 2 = 1,0460 ● 4 = 1,4404 Stem material ● M = 1,4542 ● M = 1,4542 Ball Material ● 4 = 1,4404 ● 4 = 1,4404 Seat material A = POM D = PEEK* G = PA612* K = GEMPTFE* C = PTFE* Seal material B = NBR E = FKM* F = EPDM* L = MVQ* *On request • Pneaumatic and electrical actuator For further special requests please consult our technical/co

HYDRAULIC BALL VALVES mm inch mm inch mm inch mm inch The company reserves the right to operate dimensional changes without prior notice. Carbon Steel Stainless Steel

HYDRAULIC BALL VALVES mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch Carbon Steel Stainless Steel Carbon Steel Stainless Steel The company reserves the right to operate dimensional changes without prio