*mydirectindustry

GE2HC

Product catalog summary

Overview: This document provides detailed specifications and configurations for the GE Series hydraulic ball valves, specifically the 2-way high-pressure ball valves. These valves are designed for high cyclicity and are available in both carbon steel and stainless steel materials.

Specifications:

Type: 2-way high cycles ball valve
Sizes: DN6 to DN32
Ends: BSP, NPT, SAE
Pressure: Up to PN500
Temperature Range: -20°C to +100°C for carbon steel, -30°C to +100°C for stainless steel
Treatment: Galvanized

Materials:

Body: 1.0737 (Carbon Steel), 1.4404 (Stainless Steel)
Adapter: 1.0460 (Carbon Steel), 1.4404 (Stainless Steel)
Ball and Stem: 1.4404, 1.4542
Ball Seat: PA612G
Seals: NBR, PTFE, Graphite

Design and Configuration:

Standard design includes a bare stem with actuator holes.
Valves can be customized with pneumatic and electrical actuators upon request.

Connection Types:

DIN/ISO 228 BSP: Sizes from G 1/4 to G 1 1/4
ANSI/ASME B1.20.1 NPT: Sizes from N 1/4 to N 1 1/4
SAE J1926-1: Sizes from SAE4 to SAE20

Performance:

Valves are designed to withstand up to 1,000,000 cycles.
Pressure ratings vary from 35 MPa to 50 MPa depending on the size and connection type.

Additional Information:

The company reserves the right to make dimensional changes without prior notice.
For special requests, consultation with the technical/commercial service is recommended.

Catalog excerpts

HYDRAULIC BALL VALVES ❚ GE2 HC High Cyclicity 2-WAY HIGH PRESSURE BALL VALVES 1.000.000 CYCLES Edition. 21.3 Carbon Steel ❚ STANDARD COMPOSITION OF VALVE Type: ball valve 2 way high cycles Sizes: from DN6 up to DN32 Ends: BSP-NPT-SAE Pressure: up to PN500 Temp range: from -20°C to +100°C • Treatment: Galvanized Stainless Steel Body Adapter Ball Stem Ball seat Washer Upper Bushing Lower Bushing Seeger Adapter o-ring Stem o-ring Carbon Steel Stainless Steel Stem o-ring Stem Back-up Stem Back-up Stem quad-ring Closure gasket Screws Caps Actuator Connector Joint Pin Type: ball valve 2 way high cycles Sizes: from DN6 up to DN32 Ends: BSP-NPT-SAE Pressure: up to PN500 Temp range: from -30°C to +100°C Carbon Steel Stainless Steel NBR NBR PTFE PTFE PTFE PTFE NBR NBR GRAPHITE GRAPHITE ISO 4017 8.8 ISO 4017 8.8 PVC PVC N/A N/A 1,0737 1,0737

Open the catalog to page 1

HYDRAULIC BALL VALVES STANDARD DESIGN: BARE STEM WITH ACTUATOR HOLES ❚ CODE DESCRIPTION STRUCTURE GE2 HC G 1/2 DN13 Type and way of valve GE2 HC 2-way Ends GAS DIN/ ISO 228 BSP Size from DN6 to DN32 Body Material ● 1 = 1,0737 ● 4 = 1,4404 Adapter material ● 2 = 1,0460 ● 4 = 1,4404 Stem material ● M = 1,4542 ● M = 1,4542 Ball Material ● 4 = 1,4404 ● 4 = 1,4404 Seat material A = POM D = PEEK* G = PA612* K = GEMPTFE* C = PTFE* Seal material B = NBR E = FKM* F = EPDM* L = MVQ* *On request • Pneaumatic and electrical actuator For further special requests please consult our technical/co

Open the catalog to page 2

HYDRAULIC BALL VALVES STANDARD DESIGN: BARE STEM WITH ACTUATOR HOLES Carbon Steel Stainless Steel TYPE mm inch mm inch mm inch mm inch mm inch mm inch mm inch The company reserves the right to operate dimensional changes without prior notice.

Open the catalog to page 3

HYDRAULIC BALL VALVES Carbon Steel Stainless Steel TYPE mm inch mm inch mm inch mm inch mm inch mm inch mm inch Carbon Steel Stainless Steel TYPE mm inch mm inch mm inch mm inch mm inch mm inch mm inch The company reserves the right to operate dimensional changes without prio

Open the catalog to page 4

HYDRAULIC BALL VALVES CUSTOMIZED VALVES WITH SELECTED ACTUATORS DOUBLE ACTING Customized valves with selected actuators The company reserves the right to operate dimensional changes without prior notice.

Open the catalog to page 5

HYDRAULIC BALL VALVES Customized valves with selected actuators Customized valves with selected actuators The company reserves the right to operate dimensional changes without prio

Open the catalog to page 6

HYDRAULIC BALL VALVES CUSTOMIZED VALVES WITH SELECTED ACTUATORS SPRING RETURN Customized valves with selected actuators The company reserves the right to operate dimensional changes without prior notice.

Open the catalog to page 7

HYDRAULIC BALL VALVES Customized valves with selected actuators Customized valves with selected actuators The company reserves the right to operate dimensional changes without prio

Open the catalog to page 8