Easy color change, ideal metallic application With PowerClean the operator can activate a quick purge cycle directly from the gun and eliminate all powder accumulations. Quicker color change Ideal for metallic and difficult powders © 2015 by Gema Switzerland GmbH - All rights reserved. Available also as optional kit 1

PowerClean: how does it work? ● The PowerClean function can be easily activated (7) by the operator from the gun (4) or from the control unit (5) even during the coating process. ● The system starts powerful air blasts through the PowerClean module (3), the injector (2), the powder hose and the gun (4). ● The air blasts clean the powder path and remove powder accumulations. © 2015 by Gema Switzerland GmbH - All rights reserved.

Quicker Color Change with PowerClean ● The PowerClean function removes the powder accumulations inside the injector, hose and gun by powerful compressed air blast. ● The color change process is consequently much quicker and easier. © 2015 by Gema Switzerland GmbH - All rights reserved.

Ideal for metallic and special powder ● Metallic powder accumulations inside the gun can cause shortcuts and consequent charging problems. ● With the PowerClean you can periodically remove the powder accumulations inside the injector, hose and gun and ensure a constant powder charging. © 2015 by Gema Switzerland GmbH - All rights reserved.

Available also as optional kit ● In today’ rapidly changing working conditions, powder application needs might change over time for every coater. ● PowerClean can be easily added at any time on all OptiFlex2 equipment by ordering the PowerClean upgrade kit.