OptiFlex 2 Q Colour change in 35 seconds with the new generation of manual units OptiFlex®2 Q is an extended version of the successful OptiFlex®2 B enhanced with additional features for even faster colour changes. The powerful air mover, installed in the frame of the trolley automatically cleans the suction tube as it is raised. The powder dust that is removed is extracted to the booth via an exhaust hose. The automatic cleaning process is started from the gun or by activating the remote button on the control module. All components that contain powder – from the suction tube, to the injector, powder hose, through to the gun and spray nozzle – are automatically and comprehensively cleaned with pulses of compressed air. Super-fast colour change (set-up time a total of 30-40 seconds) Unlimited number of colours Suitable for all types of powder Minimal space usage Short return on investment

Colour change: fast, simple and clean! Step 2: Raise the suction tube Step 3: Position the QuickClean module Step 4: Start the cleaning process Step 5: Change the powder box during automatic cleaning Step 6: Lower the suction tube in the new colour Technical data: Input voltage: Frequency: Power consumption: Consumption of compressed air: Approvals for gun: Approvals for unit: 100 - 240 VAC 50 / 60 Hz 120 VA 3 3 during spraying approx. 5 Nm /h / cleaning cycle (18 seconds) approx. 30 Nm /h 0102 II 2 D / PTB11 ATEX 5006 II 3 D IP54 120 °C Gema Switzerland GmbH reserves the right to make technical...