Minimum powder accumulations in the booth Magic Systems remain clean during operation: the non-conductive plastic walls and the self-cleaning floor prevent powder accumulations. Non conductive booth walls Easy and quick color change © 2015 by Gema Switzerland GmbH - All rights reserved. Improved application quality

Non-conductive walls: how do they work? ● Traditional sheet metal booth walls are conductive and attract charged powder particles that accumulate in thick layers on their surface. ● Magic Systems’ plastic sandwich walls are non-conductive and do not attract powder. ● Only a small amount of powder particles can deposit on the nonconductive walls. The charge of the deposited particles create an electric field that repels powder. © 2015 by Gema Switzerland GmbH - All rights reserved. Traditional conductive walls Magic Systems non-conductive wa

• Air-knives are integrated in the side-walls of the Magic Systems' floor. • During operation and cleaning air blasts are periodically released by the air knives. • The air blasts remove the powder accumulated on the booth floor and push it to the extraction and recovery system. • The booth floor remains clean, with just a minimum amount of powder. tSema © 2015 by Gema Switzerland GmbH - All rights reserved.

• Magic Systems have very low powder accumulation, therefore the operator can clean the walls and the floor easily and quickly with an air lance. • The risks to blow powder out of the booth and to contaminate the ambient are minimized. • The risk of color contamination due to improper booth cleaning is also minimized. • Color change is easy, quick and contamination-free. © 2015 by Gema Switzerland GmbH - All rights reserved.

• In Magic Systems the overspray powder does not accumulate in thick layers on the walls and on the floor. • The overspray powder is immediately recovered and reused. • The mix of fresh powder and recovered powder remains constant over time. • This results in significant improvements of the application quality. © 2015 by Gema Switzerland GmbH - All rights reserved.

• Magic Systems have only a minimum powder accumulation inside the booth. • At color change the operator does not need to remove thick layers of powder accumulated inside the booth. • The operator's health is much better protected. • The risk of powder escaping and contaminating the ambient is minimized. © 2015 by Gema Switzerland GmbH - All rights reserved.