Compact Bender Stick C•B•S
2Pages

Compact Bender Stick C•B•S Compact Bender Stick C·B·S …BATTERY OPERATING WITH 8T POWER ... Tension: 14,8 V Pressure: 400 Bar Hup: 85 mm Strokes: ca. 150 Weight: 9 kg Battery operating Compakt Bender Stick C·B·S The C·B·S - Compact Bender Stick is a small battery operating hydraulic press. With a weight of under 10 kg this universal tool can be used as well in the workshop as on the building site. The main task of the C·B·S with its 8 tons power and its hup of 85 mm is to adjust pieces, to position, straighten or adapt frames or handrails, bend pipes, edge flat material or round bar. The capabilities of this small tool are multifarious and will constantly be enhanced. With only one charge the C·B·S is capable to do 150 strokes. Due to its two handle bars and its two buttons it can be used vertically and horizontally. Straightening with extension

C·B·S with straightening–bending-facility The universal small bender C·B·S can over this be equipped with a straightening-bending-facility. The remodelling to pipe- and profile- handling can easily be done within seconds and without any tool. With his facility the tool now weighs about 15 kg. Handrails can be bend with it and handtrails can also be adjusted on building site. You can also straighten pipes or correct deformation after welding with the C·B·S. VIDEO C·B·S with optional straightening–bending-facility for pipes and profiles C·B·S Using on a welding table The Compact Bender Stick...