CNC Product Range EN mm
16Pages

CNC STEEL PROCESSING MACHINES sales@geka.es www.geka-cnc.com www.gekabybauer.com

GAMMA ROLLER SERIES CNC PROCESSING OF ANGLES, FLAT BARS AND C-CHANNELS The GR series are machines designed for maximum output and processing quality in the minimum space possible. The material is moved by means of a roller to optimize efficiency in a reduced space. Though the material is moved by a roller infeed, the customer can use GEKA's patented Minimal Waste System to ensure a minimum waste per bar, reducing the scrap to virtually zero. INPUT CONVEYOR UNIT PUNCHING UNIT Servo motor-driven tracking roller. Independent encoder. Feeder tracks at each end of the line. Up to 3x punches per...

GAMMA TRACTION SERIES CNC PROCESSING OF ANGLES, FLAT BARS AND C-CHANNELS The GT series are machines designed for maximum output and processing quality when processing angle bar, flat bar and C-Channel. The material is processed by the means of a pincher + carriage to optimize efficiency by processing the material with minimum scrap to ensure the best results. PUNCHING UNIT INPUT CONVEYOR UNIT 6x punches (3x per leg). CNC-controlled backmark. Hydraulic hold down. Material held and pushed with clamp. Rack & pinion system servo motor driven. DOUBLE DRILLING UNIT SHEARING UNIT 8 tools (4 per...

ALFA SERIES CNC PROCESSING OF FLAT BARS AND ANGLES The ALFA series is a CNC punching and shearing machine, has been designed to meet the needs of steel manufacturers seeking to optimize their production. This series has the capability to process both flat and angle bars, spanning lengths from 6 to 12 meters. With versatile options such as marking, drilling, mitre shearing, and automatic loading/unloading, the ALFA series optimizes production, offering steel manufacturers a comprehensive solution to enhance their efficiency and performance. INPUT CONVEYOR UNIT Rack & Pinion with Servo Driven...

MARKING UNIT DRILLING UNIT MITRE SHEARING FOR FLATS Wheel marking unit. Selected from the CNC. Dimensions: 14x10x19mm (LxWxH) Marking power 80kN. 9kW Drilling unit up to 40mm diameter. Maximum turning capacity +/- 45º.

SIGMA SERIES PROCESSING OF BEAMS, FLAT BARS, PROFILES AND TUBES The SIGMA is a CNC numerically controlled production line for drilling, tapping, and milling of steel beam profiles which can be supported on two flat surfaces and programmable from the PC. Angle profiles can be processed and, optionally, the line can be adapted to process flat profiles using a magnetic fixing square set. The machine is designed to process profiles loaded on the fixed and levelable table of the machine and automatically carries out operations with the drilling unit to programmed points in selected faces....

PROCESSING OF BEAMS FOR SOLAR TRACKERS The PUMA 2HI + PAX is specifically designed for punching I-beams and H-beams for solar trackers. Fabricators will be able to process up to 14-meter beams in a very fast process with high accuracy, and short fabrication times per beam. DOUBLE PUNCHING SYSTEM AUTOMATIC POSITIONING Double punching in one stroke on the flanges of the profile in the form of a "T", double "T" or "H" at the same time. Automatic material unlocking and carriage retraction to process the next beam. DIE BASE WITH DOUBLE OR QUADRUPLE PUNCHING Aligned and referenced in profile by...

STANDARD EQUIPMENT OPTIONAL EQUIPMENT Puma 2HI special design Special tooling for beams punching Double punching per cycle stroke Web/flange alignment system Emergency stop buttons Servo motorized positioning gripper CNC/PC Touch Screen Monitor Manually adjustable stroke of the punching cylinder Basic punches & dies package Manually height adjustable infeed/outfeed conveyors A/C for the electrical control Safety light barriers Hydraulic group oil cooler Extended punch & dies package

PAXY SERIES The PAXY series machines are designed for processing plates, for punching, marking, and drilling plates. These machines have up to 3 punches and can process a maximum thickness and diameter of 40 mm. Custom sizes are available on request. Double Gripper Unit Punching Unit Drilling Unit Material clamping guides. Set of independent servo drives in each axis. Fast and easy loading and unloading of material. 3 different punches independently selectable. Horizontal movement driven by servomotor and ball screw. Hydraulic support. Maximum diameter 40mm. Detection of material thickness...

SAMPLE PARTS

SAMPLE PARTS

STEEL SERVICE CENTERS STEEL MANUFACTURERS METAL WORKSHOP STRUCTURAL STEEL CONSTRUCTION TRANSMISSION TOWERS MANUFACTURES ENGINEERING CONSTRUCTIONS SOLAR AND WIND TURBINE www.gekabybauer.com www.geka-cnc.com Maquinaria Geka S.L.U. Polígono Zerradi 1, P.O.163 Oiartzun – Spain