TN/TS Series Tooling System Proven precision The multiple-stone honing tools of the TN/TS series distinguish themselves by their wide range of application. This series, tried and trusted for many years, is used for the honing of bores with a diameter range of 5–1,000 mm. Technical highlights The design of the TN/TS series enables the machining of through and blind bores and meets today’s quality requirements in the most varied of applications. Due to the solid construction of the tooling system, a wide range of diameters can be covered with just one honing tool, a characteristic that is of particular benefit to small-scale series production. These tools are hardened and precision-ground in all key functional areas and are thus unsurpassed in their precision. Therefore, they guarantee the best possible bore geometries and surfaces. On demand, further technical information is available on a technical data sheet. Typical areas of application Besides its universal applicability in a wide range of applications, cylinder tube processing is the most common area of application. Your benefits Profit from successfully tried-andtested components with longevity and short delivery times. Suitable for the most varied of applications, the TN/TS series covers a wide range of diameters – an additional customer benefit in respect of economy in the application. Trust in the technology leader with many years’ experience and global presence! Innovative technology combined with an economical mindset sets us apart. Gehring® Technologies GmbH • Gehringstrasse 28 • D-73760 Ostfildern Phone: +49 711/3405-0 • Fax: +49 711/3405-295 • [email protected] • www.gehring.de