Engine Specifications
Make: JOHN DEERE
Model: 4045TF270 (Turbo-charged)
Type: 4-cylinder water-cooled diesel
Displacement: 277 cid (4541 cc)
Net Power: 99.2 hp (74.0 kW) @ 2200 rpm
Battery: 12-V (120 Ah)
Fuel Tank Capacity: 34 gal (130 L)

Hydraulic System
Pumps: Two variable capacity + one gear pump
Flow Rate: 2@ 31.7 gpm (120 L/min) + 5.8 gpm (22 L/min)
Working Pressure: 4350 psi (300 bar)
Swing System Pressure: 3770 psi (260 bar)
Oil Cooler: Standard
Hydraulic Tank Capacity: 33.8 gal (128 L)

Undercarriage and Slewing System
Travel Speed: 2.2 mph (3.6 km/h), 3.9 mph (6.2 km/h)
Gradability: 30° = 58%
Steel Track Width: 19.5” (500 mm)
Number of Track Rollers: 6 on each side
Tracks Tension: Cylinder pressurized with grease
Undercarriage Length: 131” (3320 mm)
Sprocket Center: 104” (2635 mm)
Ground Clearance: 16.5” (420 mm)
Ground Pressure: 6.1 psi (0.43 kg/cm2)
Slew Speed: 11 rpm

General Specifications
Operating Weight: 25,397 lbs (11520 kg)
Dimensions (Height/Width/Length): 9’2” (2790 mm) / 7’10” (2400 mm) / 13’7” (4150 mm)
Transport Length: 23’3” (7087 mm)
Arm Length: 7’7” (2310 mm), optional long arm 8’7” (2610 mm)
Max. Digging Depth: 14’8” (4480 mm), with long arm 15’8” (4780 mm)
Max. Digging Height: 25’9” (7850 mm), with long arm 26’1” (7946 mm)
Max. Boom Height: 17’4” (5283 mm)
Max. Dump Height: 18’0” (5480 mm), with long arm 19’4” (5885 mm)
Max. Digging Radius: 25’5” (7760 mm), with long arm 26’2” (7976 mm)
Bucket Dig Force: 15,700 lbf (71.0 kN)
Arm Force: 11,100 lbf (50.3 kN)
Min. Tail Swing Radius: 5’5” (1645 mm)
Min. Front Swing Radius: 6’11” (2100 mm)
Swing Angle: Left 80°, Right 50°

Dozer Blade
Dimensions (Width/Height): 7’10” (2390 mm) / 1’9” (550 mm)
Max. Lift Above/Below Ground: 24.5” (622 mm) / 18.5” (470 mm)

Bucket - Standard
Width: 36” (915 mm)
Capacity: 17.0 cu.ft. (481 L)

Sound Levels
Power/Pressure Level: 101 dB(A) / 80 dB(A)

Standard Equipment
Includes enclosed ROPS cab, advanced hydraulic system, hydraulic oil cooler, pilot-operated joystick control, heating system, double variable displacement pump, infinitely variable hydraulic power regulation, hydraulic flow limiting, pilot pressure controlled holding valve, worklights, suspension seat, air conditioning, tool kit, rubber tracks, SAE/ISO control pattern selection, auto 2-speed transmission, auxiliary hydraulic with flat-faced couplers, independent boom swing, 3rd return line, dozer blade with hand and foot controls.

Optional Equipment
Rubber Tracks

Safety Notice
Gehl Company emphasizes the importance of reading and understanding the operator’s manual before operating any equipment. Ensure all safety devices and shields are in place and functioning properly.