Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Gefeg-Neckar Antriebssysteme GmbH
  3. MC motors

MC motors

MC motors
1 / 8 PagesView full catalog

MC motors

Product catalog summary
Overview: This document provides detailed specifications and configurations for various brushless DC motors with integrated CANopen interfaces, focusing on different gear combinations including worm, spur, and planetary gears. It outlines the characteristics, performance parameters, and options available for customization.
Specifications:
  • Motor Types: MC 543, MC 563, MC 643, MC 663, MC 843, MC 863, MH 9587, MH 95127.
  • Nominal Voltage: All motors operate at 24V DC.
  • Service Life: 20,000 hours, S1 duty.
  • Insulation Class: B, optional F.
  • Protection System: IP 40, optional up to IP 65 depending on connector configuration.
Performance Parameters:
  • Nominal Power: Ranges from 38.5W to 186W depending on the motor type.
  • Nominal Speed: Varies from 1200 rpm to 4450 rpm.
  • Nominal Torque: Ranges from 11.0 cNm to 138 cNm.
  • Peak Torque: Short-term peak torque ranges from 76 cNm to 632 cNm.
  • Efficiency: Nominal efficiency ranges from 54.5% to 75%.
Gear Combinations:
  • Worm Gears: S 567, S 668, S 769, SC 401 with various reduction ratios.
  • Spur Gears: Z 5, Z 6, M 7, Z 8, M 10 with multiple stages and reduction ratios.
  • Planetary Gears: P 40, P 50, P 60, P 80 with different stages and reduction ratios.
Customization Options:
  • Thermal protection, special shafts, special flanges, brakes, rotary encoders, and custom designs are available upon request.
Additional Notes:
  • All torques are calculated with a duty factor of 1.
  • Additional reduction ratios and gear unit combinations are available upon request.
See more

Catalog excerpts

MC motors-1

with integrated CANopen interfaceProperties: Integrated commutation electronicsRotor position sensing using 3 hall sensors. Control: Analog nominal value or CAN bus (CANopen, Drive ProfileDSP-402)Rotor:4-pole neodymium magnet, slight detent torquedue to continual angular magnetization (no grades)Service life:20,000 h, S1 dutyInsulation mat. class:B, optional FSystem of protection*:IP 40, optional up to IP 65. *Depending on the configuration ofthe D-SUB pin-and socket connectorSpecial model:Design for short-time duty with high performance Options:Thermal protection, special shafts, special flanges, custom designed Type Name > Nominal voltageUVolt DC2424 Rate Nominal powerP > 2 W38.562.5Nominal speedn > nom rpm33503400Nominal torqueT > nom cNm11.017.5Nominal currentI > nom A2.83.9 Characteristics Gradient speed torque curve1 / kmNm / rpm0.190.30Peak torque (short-term)T > A cNm76118Nominal efficiency %57.566.5 Connection Rated input powerP > 1 W67.096.5 Dynamics Weightmkg1.11.3Moment of inertiaJJkgm > 2 160260 Thermal Adm. ambient temperatureT > a հC-20 to +40-20 to +40Max. adm. stator temperatureT > max C+120+120 Coupling Shaft diameterdmm88Max. axial forceF > a N4040Max. radial forceF > r N400400 Dimensions - Characteristics TypeL / mmMC 543 147MC 563 167 System technology (tables next page) Recommended Worm gear S 567 combinations Spur gear Z 5 Z 6Planetary gear P 40 > DC-44 DC-44 size="-1">

 Open the catalog to page 1
MC motors-2

All torques are calculated with a duty factor of 1!Additional recommended combinations with gear units:Z 6(Data upon request) Type Name > Nominal voltage / DC voltage2424 nMnM S 567Worm gear 1-stage rpmNmrpmNm i=3.6259240.289380.45i=56700.366800.57 i=103350.603400.97 i=201681.191701.90 i=241401.261422.02 i=301121.421132.26 i=40841.76852.81 i=550671.98683.16 i=60562.63574.21 i=100342.8344.4 Additional reduction ratios upon request. Additional reduction ratios upon request.* Max. load at the gear output.(Motor power must be limited if necessary) Additional reduction ratios upon request. nMnM Z...

 Open the catalog to page 2
MC motors-3

with integrated CANopen interfaceProperties: Integrated commutation electronicsRotor position sensing using 3 hall sensors. Control: Analog nominal value or CAN bus (CANopen, Drive ProfileDSP-402)Rotor:4-pole neodymium magnet, slight detent torquedue to continual angular magnetization (no grades)Service life:20,000 h, S1 dutyInsulation mat. class:B, optional FSystem of protection*:IP 40, optional up to IP 65. *Depending on the configuration ofthe D-SUB pin-and socket connector.Special model:Design for short-time duty with high performance Options:Thermal protection, special shafts, special flanges,...

 Open the catalog to page 3
MC motors-4

All torques are calculated with a duty factor of 1!Additional recommended combinations with gear units:Z 6(Data upon request)Z 8P 50 Type Name > Nominal voltage / DC voltage2424 nMnM S 668Worm gear 1-stage rpmNmrpmNm i=2.517800.2911200.66i=58900.566801.04 i=76360.754861.39 i=104450.973401.80 i=152971.372272.55 i=202231.631703.03 i=301482.011133.74 i=50892.50684.64 i=70643.40496.32 i=100454.00347.43 Additional reduction ratios upon request. Additional reduction ratios upon request.* Max. load at the gear output.(Motor power must be limited if necessary) Additional reduction ratios upon request....

 Open the catalog to page 4
MC motors-5

with integrated CANopen interfaceProperties: Integrated commutation electronicsRotor position sensing using 3 hall sensors. Control: Analog nominal value or CAN bus (CANopen, Drive ProfileDSP-402)Rotor:4-pole neodymium magnet, slight detent torquedue to continual angular magnetization (no grades)Service life:20,000 h, S1 dutyInsulation mat. class:B, optional FSystem of protection*:IP 40, optional up to IP 65. *Depending on the configuration ofthe D-SUB pin-and socket connector.Special model:Design for short-time duty with high performance Options:Thermal protection, special shafts, special flanges,...

 Open the catalog to page 5
MC motors-6

All torques are calculated with a duty factor of 1!Additional recommended combinations with gear units:S 668(Data upon request)M 7 Type Name > Nominal voltage / DC voltage2424 nMnM S 769Worm gear 1-stage rpmNmrpmNm i=2.811610.911611.2i=56501.66502.1 i=7.34452.14452.8 i=103252.63253.6 i=122713.02714.1 i=152173.42174.6 i=201634.11635.5 i=301084.81086.5 i=40815.4817.3 i=58567.0569.4 Additional reduction ratios upon request. Additional reduction ratios upon request. Additional reduction ratios upon request. nMnM Z 8Spur gear 1Ֆ3 stages rpmNmrpmNm i=5.65802.045802.75i=132504.742506.39 i=17.51866.391868.61...

 Open the catalog to page 6
MC motors-7

with integrated CANopen interfaceProperties: Integrated commutation electronicsRotor position sensing using 3 hall sensors..Control: Analog nominal value or CAN bus (CANopen, Drive ProfileDSP-402)Rotor:8-pole neodymium magnet, slight detent torquedue to continual angular magnetization (no grades)Service life:20,000 h, S1 dutyInsulation mat. class:B, optional FSystem of protection*:IP 40, optional up to IP 65. *Depending on the configuration ofthe D-SUB pin-and socket connector.Special model:Design for short-time duty with high performance,more voltages upon requestOptions:Thermal protection,...

 Open the catalog to page 7
MC motors-8

All torques are calculated with a duty factor of 1! Type Name > Nominal voltage / DC voltage2424 Additional reduction ratios upon request. Additional reduction ratios upon request. Additional reduction ratios upon request. nMnM SC 401 Worm gear 1-stage rpmNmrpmNm i=6.81915.51767.2i=81636.21508.2 i=101307.61209.9 i=121088.210010.8 i=158710.18013.2 i=206512.86016.8 i=304316.14021.1 i=403318.53024.3 i=562318.22124.0 i=801623.51530.9 nMnM M 10Spur gear 1Ֆ3 stages rpmNmrpmNm i=52604.72406.2i=1111810.410913.7 i=17.97316.96722.2 i=25.95023.14630.4 i=423137.52949.3 i=75.11767.01688.1 i=98.61383.912110.2...

 Open the catalog to page 8

All Gefeg-Neckar Antriebssysteme GmbH catalogs and technical brochures

  1. M 10
    M 10

    1  Page

  2. PSA 52
    PSA 52

    1  Page

  3. PM 30
    PM 30

    1  Page

  4. PSA 68
    PSA 68

    1  Page

  5. G 6
    G 6

    1  Page

  6. AGV COMPLETE DRIVE SYSTEM
    AGV COMPLETE DRIVE SYSTEM

    2  Pages

  7. M 7
    M 7

    1  Page

  8. S 769
    S 769

    1  Page

  9. MQ 5
    MQ 5

    1  Page

  10. CAN – USB Stick2
    CAN – USB Stick2

    3  Pages

  11. DRIVE SYSTEMS
    DRIVE SYSTEMS

    12  Pages

  12. Motor Controller E6 5
    Motor Controller E6 5

    4  Pages

  13. Motor Controller E5 5
    Motor Controller E5 5

    4  Pages

  14. Motor Controller E2 5
    Motor Controller E2 5

    4  Pages

  15. M 67
    M 67

    1  Page

  16. M189
    M189

    1  Page

  17. Z5
    Z5

    1  Page

  18. Z6
    Z6

    1  Page

  19. Z8
    Z8

    1  Page

  20. Z67
    Z67

    1  Page

  21. Z89
    Z89

    1  Page

  22. D5
    D5

    2  Pages

  23. D6
    D6

    2  Pages

  24. D8
    D8

    2  Pages

  25. D95
    D95

    2  Pages

  26. K8
    K8

    2  Pages

  27. K95
    K95

    2  Pages

  28. GS1
    GS1

    1  Page

  29. GS3
    GS3

    1  Page

  30. S345
    S345

    1  Page

  31. S567
    S567

    1  Page

  32. S668
    S668

    1  Page

  33. SC401
    SC401

    1  Page

  34. SC401H
    SC401H

    1  Page

  35. Dg 71
    Dg 71

    4  Pages

  36. U 63
    U 63

    2  Pages

  37. KD 8
    KD 8

    4  Pages

  38. KD 6
    KD 6

    4  Pages

  39. D 8
    D 8

    4  Pages

  40. D 5
    D 5

    4  Pages

  41. Es 71
    Es 71

    4  Pages

  42. K 95
    K 95

    4  Pages

  43. K 5
    K 5

    4  Pages

  44. PSA 63
    PSA 63

    1  Page

  45. PSA 45
    PSA 45

    1  Page

  46. MSA 8
    MSA 8

    1  Page

  47. MSA 5
    MSA 5

    1  Page

  48. PC 63
    PC 63

    2  Pages

  49. MQ5
    MQ5

    2  Pages

  50. MQ8
    MQ8

    2  Pages

  51. MQ6
    MQ6

    2  Pages

  52. G 8
    G 8

    2  Pages

  53. G 5
    G 5

    2  Pages

  54. Z 5
    Z 5

    1  Page

  55. UCE 24
    UCE 24

    1  Page

  56. Encoders, Breaks
    Encoders, Breaks

    6  Pages

  57. Electronics, controllers
    Electronics, controllers

    2  Pages

  58. Planetary gear
    Planetary gear

    4  Pages

  59. Worm gear
    Worm gear

    7  Pages

  60. Spur gear
    Spur gear

    9  Pages

Archived catalogs

  1. Stainless steel Drives
    Stainless steel Drives

    2  Pages

  2. Universal motors
    Universal motors

    7  Pages

  3. DC motors
    DC motors

    43  Pages

  4. Three-phase and AC motors
    Three-phase and AC motors

    63  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.