General Specifications:
The document describes a multi-stage, closed spur gear designed for use with motors. It features a single gear with a ball-bearing ingoing shaft, utilizing two bearings placed back-to-back, and is lubricated for life with grease. The housing is made from zinc-diecast, allowing for user-defined installation and mounting from all accessible sides.

Tooth System Technology:
The gear-pinion combinations are mounted on a common needle bearing, with a ball bearing at the end shaft. Optional planet gears are available.

Loading Capacity:
The maximum radial force is 300 N, and the maximum axial force is 40 N. The gear can handle a maximum input speed of 4500 rpm and operates within a temperature range of -20°C to +40°C.

Mounting Specifications:
The shaft diameter is 12 mm, and the gear weighs 0.5 kg. The standard mounting part is on the front side.

Translations and Stages:
The document provides a detailed table of translations, stages, and torque (M) values for various configurations, ranging from 5 to 2930 in translation, with corresponding stages from 2 to 8 and torque values from 0.35 Nm to 4 Nm.

Dimensions:
The document includes dimensions for both add-on and solo gear configurations, as well as a woodruff key for motor attachment.