*mydirectindustry

G 5

G 5

Product catalog summary

Specifications:
The document outlines the specifications for various gear and motor combinations, including worm gear S 567, spur gear Z 6, planetary gear PM 40 and PM 50, rotary encoder RV 20 and RI 20, brake B 35, and electronics UCE 24. It provides detailed dimensions and characteristics for types G 525, G 545, and G 565, with lengths of 72 mm, 92 mm, and 112 mm respectively.

DC Motor Properties:
The DC motor features a permanent magnet with mechanical commutation using a 12-part commutator. It has a service life of 5,000 hours under S1 duty, with insulation material class B, optionally F. The system protection is IP 40, optionally IP 65. Special models are available for short-time operation with high performance.

Performance Parameters:
The nominal power ranges from 14 to 29 W, with a nominal speed of 3000 rpm and nominal torque between 4.2 and 9 Ncm. The starting torque is between 13.5 and 43 Ncm, with an idling speed of 3650 to 3800 rpm. The nominal efficiency ranges from 60.0% to 72.5%.

Mechanical and Thermal Characteristics:
The motor's weight varies from 0.47 to 0.8 kg, with a moment of inertia between 158 and 295 gcm². The thermal admittance allows for ambient temperatures from -20°C to +40°C, with a maximum rotor temperature of +120°C.

Gear Combinations:
The document provides detailed tables for gear unit combinations, including planetary, spur, and worm gears with various reduction ratios. Each gear type has specific rpm and Nm values for different stages and reduction ratios.

Additional Information:
All torques are calculated with a duty factor of 1, and additional recommended combinations and reduction ratios are available upon request. The document emphasizes the need to limit motor power if necessary to avoid exceeding the maximum load at the gear output.

Catalog excerpts

DC motor with permanent magnet Properties: Commutation: Magnetic system: Service life: Insulation mat. class: System of protection: Special model: Options: Connection to the power supply, battery, PWM controller or control ampliﬁer, residual ripple of the operating voltage max. 5% Cable connection, optional plug-in connector Mechanical commutation using a 12-part commutator 2-pole permanent ferrite magnet 5,000 h, S1 duty B, optional F IP 40, optional IP 65 Design for short-time operation with high performance, additional voltages and speeds upon request Special shafts, custom designed P2 nnom Tnom Inom TS nidle I0 1/k cn cT ␩ Terminal resistance Rated input power Weight Moment of inertia Mech. time constant Adm. ambient temperature Max. adm. rotor temperature Shaft diameter Max. axial force Max. radial force Characteristics Gradient speed torque curve Speed constant Torque constant Nominal efﬁciency Nominal power Nominal speed Nominal torque Nominal current Starting torque Idling speed No-load current Name Nominal voltages Dimensions - Characteristics System technology (tables next page) Worm gear Spur gear Planetary gear Rotary encoder Brake Electronics Recommended combinations Last modiﬁed

Open the catalog to page 1

Gear unit combinations GEFEG- • All torques are calculated with a duty factor of 1! J^^W NECKAR Additional recommended combinations upon request Nominal voltage / DC voltage S 567 Worm gear 1 -stage Additional reduction ratios upon request. Z 6 Spur gear 2-4 stage Additional reduction ratios upon request. * Max. load at the gear output. (Motor power must be limited if necessary]

Open the catalog to page 2

G 5

G 5

Catalog excerpts

All Gefeg-Neckar Antriebssysteme GmbH catalogs and technical brochures

Archived catalogs