Encoders, Breaks
6Pages

Catalog excerpts

Characteristics: The optoelectronic shaft encoder of series RV can be mounted to all motor series of"GEFEG-NECKAR". The shaft encoder is available for impulses up to 256. RV 20 has 2 signal outputs and is available with ingress protection IP50. Technical data:TypeRV 20 Operating voltage:+5V +/- 5% DCOperating current:=< 50mA Frequency:0-30kHzOutput signals:2 square wave signals (A, B)Output phase difference:90 degree +/- 45 degree Output current:212mAImpulses per revolution:Channel A and B = 80 to 256 ֖ see table* Reference signal:no Deviation of the phase shift:1/12T max. Deviation of the...

Open the catalog to page 2

Characteristics: The optoelectronic shaft encoder series RV can be mounted to all motor series of"GEFEG-NECKAR". The shaft encoder is available for impulses up to 1024. RV 30 has 6 signal outputs and is available in ingress protection IP50. Technical data:TypeRV 30 Operating voltage:+5V +/- 5% DCOperating current:=< 100mA Frequency:0100kHzOutput signals:6 square wave signals (A, B, 0 and negatived)Output phase difference:90 degree +/- 45 degree Output current:0 bis 5 mAImpulses per revolution:Channel A and B = 50 to 1024 ֖ see table*Channel A_and B_= 50 to 1024 see table*Reference...

Open the catalog to page 3

Characteristics: On request, the shaft encoders RV 20/ RV30 can also be incorporated in the housing,mounted on the motor. Ingress protections IP44 to IP65 can be realized.Other technical data see RV 20 / RV 30 Technical data:TypeRI 20RI 30Pin assignment: K12 5poleK12 12poleA GNDA ֖ GNDB not assignedB ֖ Supply voltage +5VC B channel C ֖ B channelD Supply voltage +5VD ֖ BchannelE ֖ A channel E A channelF ֖ AchannelG ֖ 0 channel H 0֖channelJ not assignedK ֖ not assignedL not assignedM ֖ not assigned Dimensiones / Wiring diagrams: Motor L / mm 534868468340,5 9551 > Z-04 size="-1">

Open the catalog to page 4

For motors Pg, Eg, Dg, Es and U:B 35B 50 Protection Type IPOOProtection Type IPOOKind of contact: loose wiresKind of contact: loose wires Protection Type IP 40Protection Type IP 44 (Option: IP 55)Kind of contact: loose wiresKind of contact: connectors including matching part For motors K, D, KD and G in the motor housing:B 35, B 50 Please note: B35 suitable for 53 mm diameter motorsB50 suitable for 68, 83, 95 mm diameter motors > Z-06 size="-1">

Open the catalog to page 6