ACTUATOR'S DRIVE HEADS The actuator heads are compatible with all modec portable valve actuators. STANDARD DUTY RING-TYPE DRIVE HEAD (“BANJO HEAD”) Essential for all rising stem handwheels, the Standard duty banjo drive head caters for all stems up to a maximum diameter of 63mm (2.48’’). It can also operate all clamping systems for handwheel and other interfaces. What’s more, it brings additional reduction which means you can multiply the actuator’s torque by 4 and reduce the speed by the same factor. Perfect for difficult or stiff handwheels. With a maximum torque of 600 Nm (440 lb.ft), the Standard duty banjo head can be mounted quickly and easily on all Easy duty actuators and on the following Standard duty actuators: HL83S-035, JA73S-077 and PY68S-087. Reference : BJH01 Maximum allowed torque: 600 Nm (440 lb.ft) Weight: 5kg (11 lb) HEAVY DUTY RING-TYPE DRIVE HEAD (“BANJO HEAD”) The Heavy duty banjo drive head should be used for very high torques. It caters for rising stems up to a maximum diameter of 70mm (2.75’’) and is compatible with all clamping systems for handwheel and other interfaces. It brings additional reduction which means you can multiply the actuator’s torque by 3 and reduce the speed by the same factor. With a maximum torque of 900 Nm (660 lb.ft), the Heavy duty banjo head can be mounted quickly and easily on all Easy duty and Standard duty actuators. Reference : BJH02 Maximum allowed torque: 900 Nm (660 lb.ft) Weight: 8.6kg (19 lb) RIGHT-ANGLE DRIVE HEAD RA30 The RA30 right angle drive head can be positioned at 90° to the actuator providing optimal positioning for the operator. It is suitable for high torques (up to 630 Nm (465 lb.ft)). The right angle drive head RA30 can be mounted quickly and easily on all our actuators. Reference : RA30 Maximum allowed torque : 630 Nm (465 lb.ft) Weight : 5.2 kg (11.5 lb) IMPORTANT For your comfort and safety, please carefully read the instruction manual before using the por