FIXED UNIVERSAL ADAPTORS (FUAxxx) These adaptors must be fixed to the handwheel before use. Thanks to their multiple “U” clamps that catch the handwheel’s spokes, they can fix on to almost every type of handwheel. The FUA adaptor is available in 2 versions for flat or tapered handwheels: FUA001 for flight or slightly tapered handwheels with spokes inclined up to 30 ° in relation to the wheel’s plane; FUA002 for tapered handwheels with spokes inclined from 30° to 40° in relation to the wheel’s plane. These drive plate adaptors can be used directly on a banjo head. To use them with a straight or right angle head, you need to use the KPA004 interface (see technical sheet 11). They can also be used with extension bars using the interface TTA (see technical sheet 12). FUA001 FOR FLAT OR SLIGHTLY TAPERED HANDWHEELS (<30°) «A» mm (in) Maximum allowed torque: 800 Nm (590 lb.ft) Requires KPA004 interface with a straight or right angle drive head IMPORTANT For your comfort and safety, please carefully read the instruction manual before using the portable