TK6000_TK7000
8Pages

The company Gebr. Trilety Ges.m.b.H. has two production sites for road cleaning TRILETY machines in the city Hallein that is situated only 15 km south from Salzburg with easy road and rail connections. Trilety has been manufacturing road sweepers for 50 years, as well as road and tunnel washing equipment. Trilety produce road sweepers with a capacity from 1.5 to 10 cbm volume, that are mounted on various small goods vehicles, UNIMOG, or heavy goods vehicles.

Due to many years of experience with the production of large road sweepers it is possible to produce according to customer wishes and requirements including the required environmental conditions so that the amount of noise and dust is reduced. The road sweepers are driven either by an auxiliary engine, with a hydraulic motor on the power take-off connection or by a hydrostatic drive. If required the sweeper unit can be produced as a demountable unit so that the vehicle can also be used in winter with another suitable unit. The options that are available include various suction solutions for...

Version TK 6000, hopper gross capacity approx. 6 m³, designed as a monocoque shell construction with water tanks installed on the sidewalls, capacity approx. 1600 l; the hopper and the in-built engine room as well as the suction and exhaust air ducts are fabricated from stainless steel, hydraulically locked discharge flap and tipping cylinder for dumping, tip angle approx. 50º. Pneumatically lowered leaves filter grid in the hopper, air outlet on the roof of the hopper for lower noise emission. Observation flap on the left and right hand sidewall. Version TK 7000 hopper gross capacity...

TRILETY OPTIONAL EQUIPMENT Leave suction unit incl. wander hose with spring counter balance at the rear, suction hose 3.6 m, 200 mm Ø, with suction tube 1 m long and water nozzle, incl. holding device Swivelling front disc brush fitted onto the front mount plate, 1200 mm Ø, for right and left-side sweeping, complete with stepless cab-controlled brush angle, ground pressure regulation and external speed regulation. Sweeper in “Dual“ design additional left-side mounted sweeping unit with suction nozzle and disc brush, including roller broom with pneumatically controlled broom swing-out....

wheelbase ca. 3575 mm lenght ca. 6500 mm sweeping width 3500 mm T E C H N I C A L D ATA Sweeper type Chassis Wheelbase Hopper gross capacity Water tank volume Sweeping width with standard sweeper suction unit Max. sweeping width in “full Dual” mode Suction power Suction fan highest speed Working speed Hopper material Sweeping width with VBB Stainless steel due to EN 1.4301 Stainless steel due to EN 1.4301 2900m

office@trilety.com . www.trilety.com The shown municipal vehicles are partly equipped with special options and do not always correspond to the standard version. Special regulations for lands are to be taken into consideration. Measurements without obligations. Technical details subject to change.