swarf Crusher
8Pages

Swarf crusher RS 300 E in a swarf processing plant consisting of a lifting and tipping unit, swarf crusher RS 300 E, scraper conveyor, a Type Permolex-Polar K51 centrifuge and a second scraper conveyor having a swivelling discharge chute to discharge the crushed swarf into the cus-tomers containers. ҕ High crushing performance at low energy usage > Swarf crushers of the type RS can be used for crush-ing long swarf of all conventional metals, such as: steel, stainless steel, aluminium and brass as produced in turn- ing, milling and drilling operations. Processing these ma- terials as a single crusher or combined with other units in the Steimel product range e.g. conveyors, centrifuges etc. The type RS crushers can be matched to practically any of our customers requirements. By using a swarf crusher, the volume of long and curly swarf can, depending on its type, be reduced by 75%. Due to their flexibility, STEIMEL type RS swarf crush-ers can be integrated into any existing systems. ҕ Low noise level crushing Good access to the crushing chamber Օ Can be integrated into any swarf process- ing system Long service life due to wear resistant crushing chamber construction Օ Low repair costs due to the quick exchange of the crushing tools No special foundations are required >

Feeding hopper The sensor is mounted in the crusher hopper and acts as a filling level control to switch the crusher on and off. Long swarf is transported to the crusher hopper by a conveyor or any other loading arrangement. The crusher is automatically switched on to start, by means of the fill- ing level control in the crusher hopper. However, this is not the case with the Type RS 300 K crusher, which was developed for direct loading by a continuously working drag-out conveyor fitted to a swarf producing machine. The feeding hopper in the lower part, as well as the hopper and tearing...

Ultrasonic sensor Crusher hopper Hopper hook Tearing arm Inspection hatch Fine crushing area Tearing hook Wiper Solid material release (option E) Swarf chute Friction clutch Gear motor Hydraulic power unit for solid material release E > Section drawing of a RS 500 E Crusher 3 >

1 Other voltages possible on request.Technical and other modifications reserved.Type suffix E for solid material release (e.g. RS 300 E ), type suffix H for hydraulic drive (e.g. RS 600 H )The types of swarf crushers RS 300 K to RS 600 have a laterally protruding drive motor. For these types please refer to the dimensions e and g . The swarf crushers RS 600 H and RS 800 H have a hydraulic drive. The necessary hydraulic power unit (dimensions k , l and m ) is mounted separately from the swarf crusher. The dimensions k , l and m for the hydraulic power unit vary according to the construction...

Pneumatic swivelling diverter chute Swarf crushers with solid material release can be fit- ted with a pneumatic swivelling chute. In normal opera- tion, the crushed swarf is led out via this chute to the conveyor. In case of a crusher jamming and the solid material release is opened, the diverter discharge chute automatically swivels to discharge the solid material and some swarf into the customers container placed below. When the solid material release closes, the discharge chute returns to the normal operating position. This sys-tem permits continuous operation of the swarf process- ing...

For connection to a discharge chute carrying coolant and swarf flushed directly from a machining operation. > Օ compact construction > The RS 300 T is suitable for swarf and coolant that is conveyed from a machining operation by means of a duct or pipe arrangement. Any excess coolant can be drained-off prior to the crusher by means of an optional adjustable mesh grating. Even swarf bundles, depend- ing on their composition, can be processed without prob- lems. The crushed swarf, which falls from the base of the crusher, can then be received and conveyed by a suit- able pump or pneumatic...

To enable the correct selection of units from the STEIMEL range of machines and equipment to meet customer requirements for every day operation, it is often necessary to make tests prior to commencing construction work. These tests are made with machines in comparable applications. Accordingly Steimel have installed equipment in a demonstration and test area where customers material and customers themselves can witness tests being conducted to assist in pre-planning new plant requirements. We are here to help you in making tests with your own materials to determine the correct machines and...