Swarf crusher type RS
8Pages

Swarf crusher RS Crushing of long swarf of all common types of metal such as steel, stainless steel, aluminum or non-ferrous metals. Reduction of the swarf volume up to 75% High crushing performance Can be integrated into any swarf processing system Low noise level crushing Long service life due to wear resistant crushing chamber construction Low repair costs due to the quick exchange of the crushing tools special foundations are required No

FunCtion   Long swarf is transported to the crusher hopper by a conveyor or any other loading arrangement. The crusher is automatically switched on to start, by means of the filling level control in the crusher hopper.   However, this is not the case with the Type RS 300 K crusher, which was developed for direct loading by a continuously working drag-out conveyor fitted to a swarf producing machine. ConstruCtion Crushing chamber   The crusher housing consists of a solid steel welded fabrication and the whole crushing chamber has a manganese steel alloy, wear resistant lining.   The crushing...

ConstruCtion Ultrasonic sensor Crusher hopper Hopper hook Inspection hatch Fine crushing area Wiper Tearing hook Solid material release (option E) Swarf chute Friction clutch Gear motor Hydraulic power unit for solid material release E Section drawing of a RS 500 E Crusher

DIMENSIONS AND TECHNICAL DATA

Dimensions and technical data

Optional equipment for swarf crushers ▲  Types of fine crushing areas Depending on the type of swarf and the required crushing result it can be necessary to choose a fine crushing area that is different from the standard form. We can deliver different forms, such as cranked, overlapping or conical forms. Hydraulic power unit and solid material release Type E as fitted to a Type RS 300 E crusher. ►  Pneumatic closing gate Depending on the swarf crusher application, the discharge chute can be fitted with a pneumatic closing gate. Where there is a need to batch the crushed swarf, as in the...

The compact swarf crusher RS 200 (E) Swarf crusher RS 200 E with automatic solid material release (Type suffix E) Technical data refer table page 4. The drive motor can be mounted in three positions.

Our demonstration/test unit   To be able to achieve ideal solutions and to select suitable units from the range of Gebr. Steimel products, it is often necessary to determine by tests in the preliminary project stages, the appropriate equipment for various applications. Steimel has therefore provided a test plant facility, which is available to our customers for simulated trials to be carried-out with their swarf material etc.   Steimel are quite prepared to conduct these tests to determine the right equipment for particular applications.   Our engineers working with our customers, to...