Gear pumps SF Compact and modular pump for low to high viscosity media Pulsation-free pumping delivery Clockwise or counter-clockwise rotation Easy to assemble and disassemble Several sealing types Electrical heating possible

The variants of the feed pump SF Type SF Pulsation-free pumping delivery Clockwise or counter-clockwise rotation Compact design Easy to assemble and disassemble Several sealing types Electrical heating possible Type SF ATEX Application in explosive locations acc. to EC-Directives 94/9/EC (ATEX 95) Area 1 + 21 with temperature control Area 2 + 22 with/without temperature control High degree of safety in potentially explosive atmospheres Type SF...M with magnetic coupling Hermetically closed Even at high temperatures and with media difficult to seal Application acc. to ATEX possible Type SFE with...

Key Data Feeding capacity 2 - 1,000 cm³ / rotation Max. speed 1,800 min-1 (Higher speeds possible depending on application) Inlet pressure -0.4 to 10 bar Differential pressure up to 25 bar Viscosity range 5 to 50,000 mm2/s Temperature range -40 °C to +250 °C   Depending on the application and varying according to the pump size. Please contact us - we will advise you! Applications   General machine construction, system engineering, chemical industry, dyestuff industry, filtration, foil manufacture, gear construction, engine construction, paper machines, marine engineering, engineering of lubricating...

Classification of variants Construction types SF Standard design D Pressure relief valve (DBV) F Base VL Lantern according to VDMA VLM Lantern with motor according to VDMA VLMF Lantern w. motor and motor base acc. to VDMA VLFM Lantern w. base and motor acc. to VDMA Constructions Grey cast iron, optional Nodular iron or Cast steel Case hardening steel Hardened, helical-toothed, Profile-grinded gear teeth Case hardening steel Hardened Nodular iron ionitrided, Helical-toothed Composite slide bearings, Bronze Shaft seal: Shaft seals R Radial shaft seal (WDR) G Mechanical seal (GLRD) P Stuffing box...

Details in section Shaft seal KR Shaft seal G (GLRD)

Components overview   The parts of an SF pump presented in the components overview are to illustrate the variety of this type of pump.   For the sake of clarity, not all optional components are shown. Here we show the essential parts.   Gebr. Steimel is your partner for individual solutions. Talk to us without obligation if you are interested in a consultation on the standard components or even in a customized version besides the range shown here.   The marking of the ATEX-compliant assemblies made here is not sufficient for an aggregate compilation. ATEX units require advice. Example composition...

Radial shaft seal WDR Electric motor Electric motor acc. to ATEX Mechanical seal GLRD Double mechanical seal GGK Ball bearing with radial shaft seal KR External drive

Flow rates SF Size Pump rate Rating Pump rate cm³/U NkW = Nominal power consumption at the pump shaft relative to a viscosity of 50-150 mm²/s (cSt). With a viscosity > 150 mm²/s (cSt), the nominal power consumption increases. The flow rate (l / min) refers to 1,450 1/min. It is reduced according to the rated speed of the engine. Deviation of flow ±5%. A viscosity of less than 50 mm²/s reduces the capacity. 1 Required drive power (20% surcharge is included).

Flow rates SF Size Pump rate Rating Pump rate cm³/U NkW = Nominal power consumption at the pump shaft relative to a viscosity of 50-150 mm²/s (cSt). With a viscosity > 150 mm²/s (cSt), the nominal power consumption increases. The flow rate (l / min) refers to 1,450 1/min. It is reduced according to the rated speed of the engine. Deviation of flow ±5%. A viscosity of less than 50 mm²/s reduces the capacity. 1 Required drive power (20% surcharge is included).

SFE8 and SFE10 with electrical heating Size SFE 8/250 Motor 1 SFE 8/300 Motor 1 SFE 8/350 Motor 1 SFE 8/425 Motor 1 SFE 10/500 Motor 1 SFE 10/575 Motor 1 SFE 10/650 Motor 1 SFE 10/750 Motor 1 SFE 10/875 Motor 1 SFE 10/1000 Motor 1 Pump rate Rating l/min NkW kW l/min NkW kW l/min NkW kW l/min NkW kW l/min NkW kW l/min NkW kW l/min NkW kW l/min NkW kW l/min NkW kW l/min NkW kW Pump rate cm³/U NkW = Nominal power consumption at the pump shaft relative to a viscosity of 50-150 mm²/s (cSt). With a viscosity > 150 mm²/s (cSt), the nominal power consumption increases. The flow rate (l / min) refers...

Model examples For general machine construction, engineering e.g. lubricating pump in an oil supply system with filter and oil coolers For the dyestuff and lacquer industry e.g. binders pump (resins) according to ATEX with double GLRD (mechanical seal), quench recipient and temperature control For the chemical industry, petrochemistry e.g. solvent pump according to ATEX with magnetic coupling and temperature control e.g. feed pump in chocolate or cocoa mass systems

quality Management Pumps Gebr. Steimel GmbH & Co. - Maschinenfabrik Dept. VTP Johann-Steimel-Platz 1 53773 Hennef Germany Phone: +49 22 42 / 88 09 - 0 Fax: +49 22 42 / 88 09 - 160 E-Mail: [email protected] Web: www.steimel.com   Steimel is certified acc. to ISO 9001:2008 / ISO 14001. The appropriate certificates are available on the website www.steimel.com in the download area.   For approvals we work together with Germanischer Lloyd, Lloyds Register of Shipping, Bureau Veritas, Det Norske Veritas, American Buro of Shipping and other institutions. SF.2-07-2013-en • © 2013 Gebr. Steimel GmbH & Co.,...