Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Gebert GmbH & Co. KG
  3. clevis DIN 71752 form G steel version (G 4 - G 16)

clevis DIN 71752 form G steel version (G 4 - G 16)

clevis DIN 71752 form G steel version (G 4 - G 16)
1 / 1 PageView full catalog

clevis DIN 71752 form G steel version (G 4 - G 16)

Product catalog summary
Overview: This document outlines the specifications for clevises according to DIN 71752 form G, with a focus on the steel version. The clevises are also compliant with DIN ISO 8140, except for the chamfer point.
Materials:
  • Free-cutting steel 11SMnPb30+C or as chosen by the manufacturer
  • Stainless steel 1.4305
  • Stainless steel 1.4571 / 1.4404
Surface Treatment:
  • Unplated
  • Zinc plated
Specifications: The document provides detailed dimensions and weights for various sizes of clevises, ranging from G 4 x 8 to G 16 x 64. Each size includes parameters such as diameter, length, and weight per piece.
Dimensional Tolerances:
  • Dimensional tolerance for half-finished products is h11 according to DIN 178.
  • Radius or 45° chamfer is at the manufacturer's discretion.
Thread Types: The document specifies standard and fine-pitch threads (FG) for different clevis sizes.
Optional Features:
  • Left-hand thread available on demand, indicated by 'LH'.
  • Further special options available upon request.
Remarks: The document includes a note on dimensional tolerances and optional features for customization.
See more

Catalog excerpts

clevis DIN 71752 form G steel version (G 4 - G 16)-1

DIN 71752 form G steel version (G 4 - G 16) DIN 71752 form G steel version order example: clevis DIN 71752 G 8 x 16 - M 8 Our clevises are also in accordance with DIN ISO 8140 except the chamfer point. • free-cutting steel 11SMnPb30+C or at the choice of the manufacturer • stainless steel 1.4305 • stainless steel 1.4571 / 1.4404 surface • unplated • zinc plated remarks: 1) dimensional tolerance half-finished product h11 acc. DIN 178 2) radius or 45° chamfer (at the choice of the manufacturer) FG = fine-pitch thread optional features • left-hand thread on demand; indication by LH; e.g. G 10 x 20 - M 10 LH • further special options available on request weight approx. kg per piece

 Open the catalog to page 1

All Gebert GmbH & Co. KG catalogs and technical brochures

  1. angle joints DIN 71802 form C / CS with threaded pin
    angle joints DIN 71802 form C / CS with threaded pin

    1  Page

  2. ball cups DIN 71805 form A plastic version
    ball cups DIN 71805 form A plastic version

    1  Page

  3. ball cups DIN 71805 form A / B steel version
    ball cups DIN 71805 form A / B steel version

    1  Page

  4. ball pins DIN 71803 form C with threaded pin
    ball pins DIN 71803 form C with threaded pin

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.