Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Gebert GmbH & Co. KG
  3. angle joints DIN 71802 form C / CS with threaded pin

angle joints DIN 71802 form C / CS with threaded pin

angle joints DIN 71802 form C / CS with threaded pin
1 / 1 PageView full catalog

angle joints DIN 71802 form C / CS with threaded pin

Product catalog summary
Overview: This document provides specifications for DIN 71802 angle joints, available in two forms: C (without safety clips) and CS (with safety clips). It includes material specifications, surface treatments, and optional features.
Specifications:
  • Form C: Angle joints with threaded pin, no safety clips. Example order: DIN 71802 C 8 - M 5.
  • Form CS: Angle joints with threaded pin and safety clips. Example order: DIN 71802 CS 16 - M 10.
Materials:
  • Ball Cups: Made from steel with a minimum tensile strength of Rm 500 N/mm², or stainless steel grades 1.4305 and 1.4571.
  • Ball Pins: Made from steel with a minimum tensile strength of Rm 600 N/mm², hardened to at least 52 HRC or 550 HV 30, with a hardening depth of at least 1 mm, or stainless steel grades 1.4305 and 1.4571.
Surface Treatment: Options include unplated or zinc plated.
Dimensions and Weight: A table provides detailed dimensions and approximate weight per 1000 pieces for various sizes, including parameters like d1, d2, a, d3, d4, e, l2, l3, SW, and angle.
Optional Features:
  • Left-hand threaded ball cups, indicated by 'LH'.
  • Easy moving version, indicated by 'L'.
  • Hardened ball cups, indicated by 'hardened'.
  • Additional special options available upon request.
Additional Information: Angle joints can be supplied with a hexagon nut DIN 934, either loose or mounted if requested.
See more

Catalog excerpts

angle joints DIN 71802 form C / CS with threaded pin-1

angle joints DIN 71802 form C / CS with threaded pin DIN 71802 form C with threaded pin without safety clips order example: angle joints DIN 71802 C 8 - M 5 ball cups DIN 71802 form CS with threaded pin and safety clips • steel with a minimum tensile strength of Rm 500 N/mm² order example: angle joints DIN 71802 CS 16 - M 10 • stainless steel 1.4305 • stainless steel 1.4571 ball pins • steel with a minimum tensile strength of Rm 600 N/mm²; ball hardened, degree of hardness at least 52 HRC or 550 HV 30, depth of hardening at least 1 mm • stainless steel 1.4305 • stainless steel 1.4571 surface • unplated • zinc plated ball Angle joints with hexagon nut DIN 934 loose, or mounted if requested. optional features • left-hand threaded ball cups; indication by LH; e.g. CS 16 - M 10 LH • easy moving version; indication by L; e.g. CSL 13 - M 8 • ball cups hardened; indication by hardened; e.g. CS 10 - M 6 hardened • further spe

 Open the catalog to page 1

All Gebert GmbH & Co. KG catalogs and technical brochures

  1. ball cups DIN 71805 form A plastic version
    ball cups DIN 71805 form A plastic version

    1  Page

  2. ball cups DIN 71805 form A / B steel version
    ball cups DIN 71805 form A / B steel version

    1  Page

  3. ball pins DIN 71803 form C with threaded pin
    ball pins DIN 71803 form C with threaded pin

    1  Page

  4. clevis DIN 71752 form G steel version (G 4 - G 16)
    clevis DIN 71752 form G steel version (G 4 - G 16)

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.