GEA POWDEREYE® The in-line analysis platform for the main powder properties

The in-line powder analysis POWDEREYE® illustration Even the smallest deviation in quality and consistency during the drying process can lead to downstream problems, rejected product or loss of production time. The POWDEREYE® from GEA is (patent pending) the inline analysis platform for the main powder properties. The POWDEREYE® provides fast powder measurements to the operator, thereby helping to prevent costly out of spec production. The measurements also form a basis for final product control and process adjustments by the operators or advanced process optimization software such as OptiPartner....

powder properties and hygienic design Residual moisture The residual moisture content is measured by NIR (near infrared) technology and provides a precise result with low variation due to a repeatable sample presentation and large measurement area size. The NIR instrument is setup using product specific algorithms and will provide accurate moisture % readings when calibrated precisely for each product recipe. Directives and standards All components in contact with product are made of stainless steel, except for the sample cup which is made of anti-static polypropylene complying with EU regulation...

GEA Process Engineering A/S Gladsaxevej 305 2860 Soeborg, Denmark Tel +45 39 54 54 54 gea.com/contact © GEA Process Engineering A/S. All rights reserved. POWDEREYE® is registered as a trademark in several countries worldwide.