Pony NS2006L
2Pages

{{requestButtons}}

Catalog excerpts

Pony NS2006L - 1

GEA Niro Soavi Technical Datasheet Pilot Unit & Laboratory Homogenizer Pony N S2006L From the world leader in high pressure homogenization: absolute quality and reliability with advanced technical solutions for any process need. PonyNS2006L is a standalone fully equipped laboratory unit for food & beverage, pharmaceutical, biotechnology, cosmetic, chemical testing or small production, featuring the performances of the industrial scale homogenizers. Compression block • Constructed from Super Duplex SS alloy and fitted with wear resistant components to maximise the service life at high operating pressure • Solid ceramic pumping plungers equipped with specially designed packing for very high pressure applications • Suction and delivery ball valves (PVB) in special alloy, highly resistant to abrasion, with replaceable valve seats in Stellite™ • Sanitary design analog pressure gauge, with built-in pulsation damper • Spring loaded overpressure relief valve Homogenizing valve • Rupture type sharp-edge homogenizing valve (Stellite™) in special abrasion and wear resistant material • Manual pressure adjustment by means of a hand-wheel • Second homogenizing stage inlcuded with flat profile homogenizing valve • A range of different homogenizing valve types are available for both stages. Re+VALVE available • Wear parts made of tungsten carbide or ceramics as option engineering for a better world Feeding system • Stainless steel feed funnel (5 l capacity) with connecting pipework to the feeding pump (inclusive of 10 Mesh filter and Tri-clamp fittings) • Lobe type pump driven by a separate electric motor with built in variable speed drive unit to adjust the feed pressure according to the product viscosity. All product contact parts are in AISI 316 • By-pass valve for re-circulating the product into the funnel and pressure gauge to read the inlet pressure Power end • Toothed belt drive • Three phase motor • Crank drive with splash lubrication Casing • Made in polished stainless steel, completely removable for maintenance and cleaning, with galvanized steel base frame • The machine is mounted on castors for easy handling Control Panel • Electric Power Board in plastic box (IP55 protection) located inside the machine casing. Assembled according to CE standards • Start/Stop push buttons for homogenizer and feed pump, emergency stop and pump speed adjustment are located on the front panel of the machine

Open the catalog to page 1
Pony NS2006L - 2

Pony N S2006L Technical specifications are not mandatory and subject to change without notice. REV.1_02/2012 Dimensional drawing This pilot high pressure homogenizer unit is designed for continuous operation up to 1500 bar and for limited productions. The machine achieves the same results as bigger size homogenizers, and its compact design allows at the same time easy installation, simple operation and quick maintenance. Suitable also for viscous products, it can be used in many different sectors, such as food, dairy, chemical, pharmaceutical, cosmetics and biotech. Compression head •...

Open the catalog to page 2

All GEA Mechanical Equipment Italia S.p.A. catalogs and technical brochures

  1. One 15TS

    2 Pages

  2. One 11TS

    2 Pages