TURBO SSB 75 THE PERFECT LOW FLOW, LOW SPEED, SLOTTED SPRAY BALL • Slow Constant Rotation - Improved Cleaning Action • No Ball Bearings - Lower Maintenance, Longer Life • High Efficiency Fan Jets - Reduced Cleaning Time • Low Flow • FDA and ATEX - Reduced Water, Chemical & Effluent Costs - Regulatory Compliant VERSATILE & UNIQUE The Breconcherry Turbo SSB 75 takes the popular slotted spray ball format into its next evolutionary phase by removing the ball bearings and slowing the rotation speed down. A unique pressure regulation system in the drive chamber helps to keep the rotation speed consistent under differing pressure. The unit functions with a hydraulic and PTFE bearing system giving the unit an increased lifetime, reducing wear and potentially prohibiting any contamination issues associated with bearing degradation. APPLICATIONS Ideally suited to low flow, variable pressure applications where a slow constant rotation speed is required to give longer chemical dwell times for improved cleaning efficiency. The tried and tested design makes the units truly versatile across any industry sector. The units are suitable for cleaning small/medium size vessels and manufacturing equipment. Compact in design, effective in performance, they meet all the essential FDA requirements of hygiene and purity. This makes them highly suitable for the pharmaceutical, and biotech industries as well as food, beverage and other hygiene conscious industries. OPERATION Wash fluid is directed through the slots on the rotating ball, producing independent strong fan jets giving total coverage. Each fan jet targets a specific area of the vessel. WWW.BRECONCHERRY.COM

TURBO SSB 75 MAINTENANCE & INSPECTION Breconcherry Limited, Lynden House Lynden Business Park Ledbury, Herefordshire HR8 2DJ, UK Tel: +44 (0)1531 632476 Fax: +44 (0)1531 633839 E-mail: [email protected] The low wear design requires minimal maintenance. No Spare parts are required. Technical assistance can be obtained through the global Breconcherry distributor network. As with all mechanical devices, it is recommended that the unit be regularly inspected for correct operation. MINIMUM MANHOLE/FLANGE SIZE The minimum manhole/flange opening size required for unit insertion is 50mm. TECHNICAL...