video corpo

OpenXFLO

OpenXFLO

OpenXFLO

Product catalog summary
Introduction
OpenXFLOTM is an innovative liquid-end design concept developed by GEA Niro Soavi, aimed at improving the homogenization process for viscous liquids and products containing solids. This technology enhances product quality in chemical slurries, latex, and polymer nanodispersions.

Construction Concept
The High Pressure Homogenizer functions as a reciprocating pump, transforming liquid products through high fluid dynamic energy. The patented OpenXFLOTM compression block features a clean design with free pumping chambers and springless valves, reducing the risk of clogging.

Main Features
  • Clean design without dead-ends
  • Reduced maintenance costs
  • Hygienic valve assembly suitable for viscous products
  • Corrosion-resistant materials
  • Production range: 1500 - 23000 l/h at 150 - 600 bar
  • Applicable on various machine models

Technical Advantages
  • No solid build-up or production stops
  • Optimized valve guide design
  • Improved product quality with low shear stress

Design Concept and Applications
OpenXFLOTM is suitable for new applications such as chemical slurries, specialty foods, waste water slurries, and latex and polymer nanodispersions. It offers benefits like improved product properties, reduced processing costs, and enhanced environmental impact.

Technical Specifications
OpenXFLOTM can be installed on standard drive end configurations, with typical pressure ratings of 150 - 450 bar. Special executions are available upon request.

About GEA Niro Soavi
GEA Niro Soavi is a global leader in high pressure homogenizers, providing advanced technology and comprehensive support worldwide. The company is ISO 9001:2008 certified and offers extensive R&D and after-sales services.

Contact Information
GEA Niro Soavi, Via A. M. Da Erba Edoari, 29 - I 43123 Parma (Italy). Phone: +39 0521 965411, Fax: +39 0521 242819, Email: [email protected], Website: www.niro-soavi.com
See more

Catalog excerpts

OpenXFLO-1

GEA Niro Soavi Homogenizers Technical Leaflet: OpenXFLOTM OpenXFLO is an innovative and revolutionary liquid-end crystals, agglomerates, fibers, solid pieces. This technology is used design concept, developed by GEA Niro Soavi. The special clean to make the homogenization effect available in chemical slurries, configuration of OpenXFLOTM liquid-end allows a free flow to the Latex, and Polymers Nanodispersions in order to improve the final homogenizing valve for viscous and liquids products containing product quality. engineering for a better world

 Open the catalog to page 1
OpenXFLO-2

The High Pressure Homogenizer is a special reciprocating pump. When the product enters the machine, it is pumped across the high pressure block to the homogenizing valve, the core of the homogenizing process.The liquid product is transformed by means of high fluid dynamic energy. The patented OpenXFLO™ compression block (EPO 2040828) features a special liquid-end clean design concept: the completely free pumping chambers and the pumping valve configuration without springs eliminate the risk of solids accumulation and clogging. With OpenXFLO™ design concept the product with agglomerated fibers...

 Open the catalog to page 2
OpenXFLO-3

Latex and polymers Nanodispersions. • Improved final product quality and performance • Reduced production costs • Reduced waste for non-compliance • From batch to in-line processing • Free flow across the pumping valves • Increased production volumes • Longer production time Chemical slurries, polymerizing & shear sensitive products. • Micro-sizing of components for improved effectiveness • Reduction of recipe costs • Enhanced product properties (e.g. gloss, color) • Updates process technology for safe and environmentally friendly products Speciality foods. • Low product shear stress in pumping...

 Open the catalog to page 3
OpenXFLO-4

Production range: 1500-23000 l/h @ 150-600 bar. OpenXFLOTM is a compression block design which can be installed on standard drive end configuration as option, to comply with special products requirements. Typical working pressure rating is 150 - 450 bar, special executions for flow rate and pressure rating are available upon request. OpenXFLOTM is applicable on machine models Ariete NS3015, NS3024, NS3037, NS3075, NS3110, NS 5132. GEA Niro Soavi in the world. GEA Niro Soavi, part of GEA Group, is the global technology leader in high pressure homogenizers and high pressure pumps for dairy & food,...

 Open the catalog to page 4

All GEA Breconcherry catalogs and technical brochures

  1. catalog 2013

    74  Pages

  2. Troll Ball

    2  Pages

  3. Tornado 4

    1  Page

  4. Turbo SSB 125

    2  Pages

  5. Turbo SSB 75

    2  Pages

  6. Accessories

    7  Pages

  7. Turbo SSB 40

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.