*mydirectindustry

Catalogs
GE Vernova
9F.04, 9F.05, 9F.06

9F.04, 9F.05, 9F.06

Product catalog summary

Overview
GE's 9F gas turbine is one of the most manufactured turbines globally, known for its consistent performance and ability to operate on a diverse range of fuels. It is suitable for combined cycle and CHP power applications, offering flexibility and rapid response to changes in demand or renewable generation usage.

Specifications
The 9F series includes models 9F.04, 9F.05, and 9F.06, with the 9F.06 being the largest and most efficient. Key specifications include:

Simple Cycle Output: 265-359 MW
Combined Cycle Efficiency: >62%
Compression Pressure Ratio: 16.9 to 19.5
Exhaust Temperature: 1,132°F to 1,184°F
Ramp Rate: Up to 65 MW/min

Performance
The turbines offer high efficiency and reliability, with the 9F.06 model achieving a simple cycle net efficiency of 41.9% and a combined cycle net efficiency of 62.2%. The turbines are designed to meet World Bank emissions standards without water injection when operating on liquid fuel.

Operational Flexibility
The 9F turbines provide operational flexibility with rapid adjustment capabilities to accommodate demand changes or renewable energy integration. They feature fast ramp rates and short startup times, enhancing their suitability for dynamic power generation environments.

Customer Highlight
The Tianjin Lingang combined cycle cogeneration power plant in China, featuring a GE 9F.05 turbine, is noted for its high efficiency and reliability, serving as a dependable source of heat and power.

Technical Features
The turbines utilize hydrogen-cooled generators and offer various configurations, including three-pressure reheat cycles. They are designed for both single and dual combined cycle plant setups, with specific performance metrics provided for each configuration.

Conclusion
GE's 9F turbines are a robust choice for power generation, offering high efficiency, flexibility, and compliance with environmental standards. Their design supports a wide range of operational scenarios, making them a versatile solution for modern energy needs.

Catalog excerpts

9F POWER PLANTS (50 Hz) One of the most manufactured gas turbines in the world, GE’s 9F delivers consistent performance and accommodates a diverse range of fuels, making it ideal for a variety of combined cycle and CHP power applications. 9F power plants provide flexibility and rapid response so operations can be quickly adjusted to compensate for changes in demand or use of renewable generation. CAPABILITY 300+ units operating in the field with 17+ million fired hours & 250,000 fired starts VERSATILITY Operational flexibility that can be rapidly adjusted to compensate for changes in demand or use of renewable generation SUSTAINABILITY Delivers water conservation and World Bank emissions standards without water injection while operating on liquid fuel THE 9F.06 The 9F.06 is the largest, most efficient F-class turbine and a continued evolution of the best of our 9HA and 9F.05 products.

Open the catalog to page 1

CUSTOMER HIGHLIGHT 265-359 MW SUTJUf™ >62% COMBINED CYCLE EFFICIENCY 1.) Ramp rates are Fast Ramp via AGC. 2.) Start times recognize purge credit. Turning gear to full speed, full load and synchronized to grid. Peaking maintenance factors may apply depending on the operating profile. 3.) Start times are based on rapid response technologies in hot start conditions with purge credit recognized. Simultaneous start sequence of gas turbine may apply depending on exact project configurations. NOTE: All ratings are net plant, based on ISO conditions and natural gas fuel. Actual performance will vary...

Open the catalog to page 2

9F.04, 9F.05, 9F.06

9F.04, 9F.05, 9F.06

Catalog excerpts

All GE Vernova catalogs and technical brochures

Archived catalogs