6F POWER PLANTS (50/60 Hz) With GE’s 6F gas turbine, plant operators can attain the outstanding performance, reliability, and flexibility typically only seen in larger power plants. The 6F packs a lot of power into a small package, and its inherent durability and flexibility make it ideal for harsh and remote environments. Whether it be for 50 Hz or 60 Hz operation, the 6F maintains optimal efficiency and exhaust energy for combined cycle and CHP applications. The 6F offers segment-leading 32,000-hour combustion and hot gas path inspection intervals. CAPABILITY Most efficient pair of F-class products capable of operating on traditional E-class fuels Plant design enables project commencement to completion in 20 months SUSTAINABILITY Leading DLN emissions: 15 ppm NOx and 9 ppm CO without water or steam injection system DID YOU KNOW? The 6F.01 has both cold-end and hot-end drive configurations to meet new plant or repower requirements.

SIMPLE CYCLE OUTPUT >58% COMBINED CYCLE EFFICIENCY CUSTOMER HIGHLIGHT 1.) Ramp rates are Fast Ramp via AGC. 2.) Start times recognize purge credit. Turning gear to full speed, full load and synchronized to grid. Peaking maintenance factors may apply depending on the operating profile. 3.) Start times are based on rapid response technologies in hot start conditions with purge credit recognized. Simultaneous start sequence of gas turbine may apply depending on exact project configurations. NOTE: All ratings are net plant, based on ISO conditions and natural gas fuel. Actual performance will vary...