TM2500 POWER PLANTS
TM2500 POWER PLANTS
The TM2500 is designed to provide a temporary power solution, acting as a bridge to permanent installations or as backup power during emergencies such as natural disasters, plant shutdowns, or grid instability. It offers a rapid deployment capability, with power available on the grid within 30 days of contract signing, and is noted for its high power density among trailer-mounted gas turbine options.
The TM2500 can start from cold metal to full power output in just 8 minutes, showcasing its quick response capability.
This unit is capable of operating on a variety of fuels, including natural gas, liquid fuels, propane, and naphtha, making it adaptable to different fuel availability scenarios.
The TM2500 emits 10 times fewer emissions compared to reciprocating technology and exceeds World Bank emission requirements, highlighting its environmental benefits.
- Single Cycle (SC) Performance: The TM2500 offers a net output of 33.6 MW at 50 Hz and 35.9 MW at 60 Hz, with net heat rates of 9,794 Btu/kWh and 9,330 Btu/kWh respectively, translating to efficiencies of 34.8% and 36.6%.
- Combined Cycle (CC) Performance: For a single CC plant, the net output is 48.4 MW at 50 Hz and 50.5 MW at 60 Hz, with net heat rates of 6,851 Btu/kWh and 6,703 Btu/kWh, achieving efficiencies of 49.8% and 50.9%. For a double CC plant, the net output increases to 97.2 MW at 50 Hz and 101.3 MW at 60 Hz, with efficiencies of 50.0% and 51.1%.
- Operational Flexibility: The plant can operate at a minimum load of 35% to 36%, with a ramp rate of 30 MW/min for single CC and 60 MW/min for double CC configurations. The startup time for hot conditions is 30 minutes.
All performance ratings are based on ISO conditions and natural gas fuel, with actual performance subject to variation based on specific project conditions and fuel types.
Catalog excerpts
CAPABILITY 8-minute start from cold metal to full power output VERSATILITY All units are natural gas/liquid fuel capable across a wide range of fuels, including propane and naphtha SUSTAINABILITY 10X lower emissions than reciprocating technology; exceeds World Bank requirements The TM2500 is ideal for providing a baseload bridge to permanent power installations or for generating backup power in the wake of natural disasters, plant shutdowns, or grid instability. Our complete solutions—including trailermounted gas turbine generator set and containerized balance of plant—can put power on the grid within 30 days of the contract signature; this fast power provides the greatest power density among gas turbine trailer-mounted offerings. NOTE: All ratings are net plant, based on ISO conditions and natural gas fuel. Actual performance will vary with project-specific conditions and fuel. © 2018 General Electric Company. All rights reserved. GEA32938A (11/2018)
Open the catalog to page 1All GE Power catalogs and technical brochures
6B HEAVY DUTY GASTURBINE1 Page
7HA.01/.02/.031 Page
TM25001 Page
D200/A2002 Pages
STF-600 series2 Pages
LM25001 Page
Hybrid Solutions27 Pages
GAS TO POWER20 Pages
LMS100®7 Pages
Steam Turbine STF-600 Series2 Pages
9HA POWER PLANTS1 Page
- Steam generator
- Three-phase alternator
- GE power generation turbine
- Industrial alternator
- Generator alternator
- GE combined-cycle turbine
- Steam turbine
- Aeroderivative turbine
- Vertical steam generator
- Gas steam generator
- Power plant
- Single-shaft turbine
- Horizontal steam generator
- Air cooled alternator
- Compact alternator
- GE multi-stage turbine
- Power plant alternator
- Gas power plant
- Heat-recovery steam generator