>34 MW SIMPLE CYCLE OUTPUT >38% SIMPLE CYCLE EFFICIENCY IDEAL FOR PEAKING AND CHP APPLICATIONS, THE LM250 0 DELIVERS POWER WITH RELIABILITY GREATER THAN 99 PERCENT AND AVAILABILITY GREATER THAN 98 PERCENT. The LM2500’s high efficiency helps reduce operating costs, plant emissions, and reliance SC Net Heat Rate (Btu/kWh, LHV) on the local grid. With its dual fuel capability, SC Net Heat Rate (kJ/kWh, LHV) including singular annular combustor (SAC) or delivers performance with low emissions in CC Net Heat Rate (Btu/kWh, LHV) CC Net Heat Rate (kJ/kWh, LHV) a variety of situations and water availability Plant Turndown – Minimum Load (%) for configuration, making it a great choice for Ramp Rate (MW/min) customers who need a more tailored power Startup Time (RR Hot†, Minutes) generation solution. The LM2500’s cycling scenarios. It features high reliability with control system redundancy, along with multiple options capability allows multiple daily starts and CC Net Heat Rate (Btu/kWh, LHV) stops, providing a strong solution for grids with CC Net Heat Rate (kJ/kWh, LHV) penetration of renewable generation. Its open Plant Turndown – Minimum Load (%) Ramp Rate (MW/min) Startup Time (RR Hot†, Minutes) NOTE: ll ratings are net plant, based on ISO conditions and natural gas fuel. Actual performance will vary with project-specific A conditions and fuel. † Rapid Response/Hot Start configuration allows for faster accessibility, easier maintenance, and increased speed of engine removal/replacement. † Engine capability only © 2021 GE. All rights reserved.