Distribution Feeder Protection 735/737 FEEDER Protection System Three-phase and ground feeder protection Key Benefits • Minimize replacement time - Draw-out construction • Simplify testing - Built in simulation features • Access information - via Modbus RTU Applications • Primary circuit protection on distribution networks at any voltage level • Backup protection for transformers and transmission lines Features Features Protection and Control • 3 phase time overcurrent • Ground time overcurrent • 5 curve shapes • 4 curve shift multipliers per curve • 10 time multipliers per curve • ANSI, IAC, or IEC/BS142 curves • Phase instantaneous overcurrent • Ground instantaneous overcurrent • Pickup level for each overcurrent • Outputs: trip, aux trip, service • Aux trip: 86 lockout, ground trip • SR737 has 8 additional output relays 8 LED trip indicators 4 LED status indicators Current bar graph, % of CT RS485 or RS422 communications ModBus™ RTU protocol Baud rate up to 19,200 bps Monitoring & Metering • Trip record of last 5 trips • Pre-trip data includes currents • True RMS sensing EnerVista™ Software • EnerVista™ software - an industry leading suite of software tools that simplify every aspect of working with GE Multilin devices • EnerVista™ Integrator provides easy integration of data from the 735/737 into new or existing monitoring and control systems Digital Energy Multilin

735/737 Feeder Protection System Protection The 735/737 is a digital feeder relay designed for primary circuit protection on distribution networks of any voltage. Advanced protection features include: Three-Phase and Ground TOC Distribution Feeder Protection The 735/737 provides a choice of five separate TOC curve shapes. For each curve shape 10 different time multipliers and four different curve shifts may be set. Three different curve types can be selected: ANSI, IAC, and IEC/BS142. This allows the selection of the optimum curve for coordination with equipment. The front dials allow the user...

735/737 Feeder Protection System • Automatic document and software version updates via the Internet and detailed e-mail notification of new releases. • Set up the 735/737 - and any other GE Multilin device - in minutes. Retrieve and view oscillography and event data at the click of a button. • Plug-and-Play monitoring automatically creates customized monitoring screens for your 735/737 - no programming required. EnerVista™ Viewpoint EnerVista™ Launchpad is a complete set of powerful device setup and configuration tools that is included at no extra charge with the 735/737. • Powerful testing tools...

735/737 Feeder Protection System Technical Specifications Distribution Feeder Protection protection PHASE TIME OVERCURRENT (51) Pickup level: LO: 20 – 100%/OFF HI: 110 – 220%/OFF % of CT rating Curve types: ANSI, IAC, IEC/BS142 Curve shapes: Definite time, moderately inverse, inverse, very inverse, extremely inverse; see time/overcurrent curves; curves apply up to 20 x pickup or 20 x CT, whichever is less. Time multiplier: 10 curves 1 – 10 for each shape, 4 shift multipliers 0.5/0.8/1/1.1 Definite time: 100 ms to 1 sec (100 ms steps) Reset: Time reset to zero each time current level falls below...