Catalogs >
GE Gas Turbines >
18900_5_15

18900_5_15
8Pages

Catalog excerpts

GE Power & Water Distributed Power power ratings *Trademark of General Electric Company.

Gas Compression & Mechanical Drives Natural Gas Fueled Engines Continuous Duty I.C. Water Temp. (Tcra) 130°F 54°C Bore & Stroke 1 Engine available with Low Fuel Pressure System (LFPS) with the same ratings. Refer to Technical Data for LFPS ambient and altitude adjustments. 2 Engine ratings are 700-1000 rpm for low speed turbocharger operation and 1000-1200 rpm for high speed turbocharger operation. 3 These power ratings require pricebook option Code 1100 (176 BMEP) and DSM. They are available continuously when applied per WKI* Power and Timing Curve S7079-19. It is permissible to operate at...

Open the catalog to page 2

Mechanical Drives Natural Gas Fueled Engines Intermittent Duty I.C. Water Temp. (Tcra) 130°F 54°C Bore & Stroke 1 Engine available with Low Fuel Pressure System (LFPS) with the same ratings. Refer to Technical Data for LFPS ambient and altitude adjustments. 2 Engine ratings are 700-1000 rpm for low speed turbocharger operation and 1000-1200 rpm for high speed turbocharger operation. 4 Inline engine ratings are 1200 - 1400 rpm for low speed turbocharger operation and 1400 - 1800 rpm for high speed turbocharger operation.Vee engine ratings are 1100 - 1600 rpm for low speed turbocharger...

Open the catalog to page 3

Power Generation Natural Gas Fueled Engine & Enginator* Remote Radiator Cooling (kWe) I.C. Water Temp. (Tcra) 130°F 54°C I.C. Water Temp. (Tcra) 130°F 54°C I.C. Water Temp. (Tcra) 130°F 54°C

Open the catalog to page 4

Power Generation Radiator Cooling, Unit Mounted I.C. Water Temp. (Tcra] Continuous Standby Continuous Standby 1 Engine available with Low Fuel Pressure System (LFPS) with the same ratings. Refer to technica data for LFPS ambient and altitude adjustments. 3 These power ratings require pricebook option Code 1100 (176 BMEP). They are available continuously when applied per WKI Power and Timing Curve S7079-19. It is permissible to operate at up to 5% overload for two hours in each 24 hour period. 9 Rating is for high compression ratio pistons only Generator Standby Power Rating (kWe): This...

Open the catalog to page 5

Alternative Fuels Continuous Duty Bio-Gas • Landﬁll • Digester I.C. Water Temp. (Tcra) 130°F 54°C Bore & Stroke 1 Engine available with Low Fuel Pressure System (LFPS) with the same ratings. Refer to technical data for LFPS ambient and altitude adjustments. 7 No overload allowed. 11 Engine operation using 400 - 500 Btu/ft3 (15.7 - 19.7 MJ/m3). Landﬁll fuel requires 175°F (80°C) ICW. Option code 1100 is not available. NOTES: • Low Btu (caloriﬁc value) fueled engines operate on fuel with 400 Btu/ft3 (15.7 MJ//m3) or greater saturated low heat (net caloriﬁc value) and are equipped with special...

Open the catalog to page 6

HD-5 Propane Fueled Engines Continuous Duty I.C. Water Temp. (Tcra) 130°F 54°C Bore & Stroke 19 Contact Application Engineering regarding stability in Power Generation applications NOTES: • These engines have HD-5 propane as a secondary fuel option: VHP–GL Series, VHP–GSI Series. • No overload allowed on all HD-5 propane ratings. • Requires a minimum of 34 WKI fuel. • Engine may require optional fuel system. NOTES: Rating Standard: All models: Ratings conform to ISO 3046/1 (latest version) with a mechanical eﬃciency of 90% and auxiliary water temperature, Tcra, as speciﬁed in the Power...

Open the catalog to page 7

GE Power & Water 1101 West Saint Paul Avenue Waukesha, WI 53188-4999 USA P: +1.262.547.3311 F: +1.262.549.2759 Visit us online at: www.ge-distributedpower.com ©2015 General Electric Company All Rights Reserved Waukesha Engine Model Preﬁx Designations Number of cylinders except 275GL which states actual number of cylinders. P = 16 H=8 L = 12 F=6 Suﬃx Designations G = Naturally aspirated GSI = Turbocharged intercooled GSID = Turbocharged intercooled draw-thru GL = Turbocharged intercooled lean burn LT = Lean combustion turbulence GLD = Turbocharged intercooled lean burn draw-thru LTD = Lean...

Open the catalog to page 8