Gas Turbines Catalog
31Pages

{{requestButtons}}

Catalog excerpts

Gas Turbines Catalog - 2

Introduction GE10 GE10-1 GE10-2 MS5001 MS5002C-D MS5002E MS6001B/MS7001EA/MS9001E PGT16 PGT25 PGT25+ PGT25+G4 LM6000 LMS100 Main Components 18 Heavy Duty Axial Compressor 19 First Stage Heavy Duty Turbine Nozzles 19 Buckets and Heavy Duty Turbine Wheels Gas Turbine Operability LNG, Exploration and Production, Floating Production Units Pipeline Transportation Refinery and Petrochemicals Test Facilities Service Training Gas Turbine Data Sheet

Open the catalog to page 2
Gas Turbines Catalog - 3

GE manufactures a complete line of gas turbines for all major Oil & Gas Industry applications. They are installed in natural gas plants, gas compression stations, oil booster stations, petrochemical plants and power generation and cogeneration plants worldwide. GE’s Oil & Gas business has long-standing experience in manufacturing gas turbines dating back to 1961 when a manufacturing agreement was established with GE (U.S.A.) to complement the existing portfolio of products for the petroleum and petrochemical industries (reciprocating and centrifugal compressors, gas engines, pumps, valves,...

Open the catalog to page 3
Gas Turbines Catalog - 4

GE10 Gas Turbines The GE10 is a heavy-duty gas turbine in the 12MW range, available in either a single or a twoshaft configuration. It is the evolution of the field proven PGT10 and incorporates the latest in aerodynamic design, and compact and versatile package arrangements for both Power Generation and Mechanical Drive applications. The cases are horizontally split and the rotor has a disk architecture. The combustion system consists of a horizontally positioned single can. The GE10 is available in both diffusion combustion system and DLN (Dry Low NOx) versions (15/25 ppmvd NOx) and is...

Open the catalog to page 4
Gas Turbines Catalog - 5

GENERAL SPECIFICATIONS The single-shaft version is optimized for power generation applications. The turbine consists of three reaction stages. In the first two stages the hot gas parts are cooled by air extracted from the axial compressor. The second and third stages have interlocked shrouds to limit tip leakage and blade vibration. Axial Compressor - 11-Stage Axial Flow - 15.5:1 Pressure Ratio Combustion Chamber - Single Can Combustor - Pollution prevention: - DLN Gas Fuel at 25 ppmvd NOx - DLN Gas Fuel at 15 ppmvd NOx - DLN Dual Fuel Gas Fuel at 25 ppmvd NOx - DLN Dual Fuel Liquid Fuel at...

Open the catalog to page 5
Gas Turbines Catalog - 6

GENERAL SPECIFICATIONS The two-shaft version of the GE10 is optimized for mechanical drive applications. It consists of two air-cooled high pressure reaction stages and two low pressure reaction stages coupled to the power shaft. To optimize the behavior at partial speed/load a variable geometry Nozzle Guide Vane (NGV) is installed between the HP and LP sections. Axial Compressor - 11-Stage Axial Flow - 15.5:1 Pressure Ratio Combustion Chamber - Single Can Combustor - Emission Control: - DLN Gas Fuel at 25 ppmvd NOx - DLN Gas Fuel at 15 ppmvd NOx - DLN Dual Fuel Gas Fuel at 25 ppmvd NOx -...

Open the catalog to page 6
Gas Turbines Catalog - 7

GE10-2 Gas Turbines Mechanical Drive Package Arrangement AVAILABLE OPTIONS The GE10-2 package is designed for optimum performance in pipeline, re-injection and other oil and gas field applications (on- and off-shore), as a pump drive, and also for power generation applications. The base configuration consists of a complete unit configured for outdoor installation and has been developed for hazardous area installation in accordance with API standards. The enclosure guarantees a sound pressure level below 85 dBA at 1 m. The main skid incorporates the gas turbine, electric starting system,...

Open the catalog to page 7
Gas Turbines Catalog - 8

MS5001 Gas Turbines The MS5001 single shaft turbine is a compact heavy-duty prime mover designed for long life and ease of operation and maintenance. The three main features of its simple design are: - 17-stage, axial compressor - Combustion system with 10 chambers capable of burning a wide range of fuels including natural gas, light and heavy distillates, and crude and residual oil. A DLN System is also available. - Two-stage turbine with high energy stage design. The first-stage nozzles are cooled by the axial compressor discharge air. The MS5001 Gas Turbine is the ideal solution for...

Open the catalog to page 8
Gas Turbines Catalog - 9

MS5002C-D Gas Turbines The MS5002 is a gas turbine specifically designed for mechanical drive applications such as gas boosting, gas injection/re-injection, oil & gas pipelines, LNG plants and gas storage. It has a broad operating speed range to meet the operating requirements of the most common driven equipment (centrifugal compressors and pumps) as well as the ability to burn a large variety of gaseous and liquid fuels. The MS5002 gas turbine was introduced in the market in the 1970s and has been updated and up-rated over the years to meet the industry demand for increased output....

Open the catalog to page 9
Gas Turbines Catalog - 10

The most recent addition to the GE family of gas turbines is the MS5002E which delivers high efficiency, low environmental impact and high reliability. This dual-shaft gas turbine has proven its capability for use in power generation and mechanical drive applications. The MS5002E uses GE’s state-of-the-art combustion technology (DLN2.5H) which has accumulated more than 14 million firing hours in the “F/FA” Class GE Frame gas turbine. This model was designed to maintain or exceed the availability and reliability of previous Frame5 models. To maximize hot parts life duration, the firing...

Open the catalog to page 10
Gas Turbines Catalog - 11

MS6001B/MS7001EA/MS9001E Available for Oil & Gas App lications APPLICATIONS These gas turbines are fuel-flexible, and can operate on natural gas, liquefied natural gas (LNG), distillate and treated residual oil in a variety of applications including: - mechanical drive for large compressor trains - simple cycle and combined cycle - base load and peaking power generation - industrial and cogeneration - 17-stage compressor with stacked disk design - reverse flow combustion system with an individual nozzle single combustion chamber - 3-stage turbine with air-cooled, first and second-stage...

Open the catalog to page 11
Gas Turbines Catalog - 12

PGT16 Aeroderivative Gas Turbines GENERAL SPECIFICATIONS The PGT16 gas turbine consists of the twin spool GE Aeroderivative LM1600 Gas Generator coupled with a rugged, industrial power turbine designed by GE’s Oil & Gas business. The LM1600 Gas Generator is derived from the F404 turbofan aircraft engine. The power turbine of the PGT16 gas turbine is identical to that of the PGT10 heavy duty, high efficiency gas turbine which has been in operation for more than half a million hours. The power turbine shaft speed (7900 RPM) is optimized for direct coupling to pipeline, injection and process...

Open the catalog to page 12

All GE Gas Turbines catalogs and technical brochures

  1. LM6000

    1 Pages

  2. LMS100®

    7 Pages

  3. 18900_5_15

    8 Pages

  4. 1212_1012

    12 Pages

  5. HSR line

    6 Pages

  6. 7E.03 HDGT

    15 Pages

Archived catalogs