CPS6000 Cabinet Power System
20Pages

CPS6000 Cabinet Power System -48V DC Outside Plant and Customer Premise Solution Overview Rectifier/Ringer Options CPS6000 systems are easy to setup and operate with a broad range of applications in outside plant and customer premise locations. The controller can be configured using either the front panel display, a laptop computer connected to the local port, or remotely using the Ethernet connection. Battery management features and options include slope thermal compensation, low voltage battery disconnect, battery high temperature alarm and battery shorted cell detection. Ideally suited for applications where space and durability in harsh environments are critical, CPS6000 is available in either front or rear wiring configurations. The CPS6000 offers a wide range of rectifiers from 10A to 50A with input voltages both in 120V and 208/240V nominal for worldwide applications. A six position rectifier shelf (300A) with external distribution panel accommodates up to 26 bullet breaker positions. The entire rectifier line is designed for operation in the temperature range -40°C to +75°C. The CPS6000 is NEBS Level 3 certified and Zone 4 rated. The CPS6000 also has an available ringer module for 100VA ring voltage generation with true 1+1 redundancy for reliable remote terminal deployment. • Hardened for extreme environments Shelf Options CPS6000 is a -48Vdc compact power system that is 2U high (3.50 in./ 89 mm) and mounts in either 19” or 23” wide frameworks. The CPS6000 is a vertical airflow system consisting of rectifiers, ringers, controller, battery monitoring and integrated or external distribution options. Controller Options The CPS6000 incorporates two controller types. The shelf configurations utilize the Pulsar Edge Controller which consolidates all controller functionality into a single plug-in module for higher reliability. CPS6000 systems with external distribution utilize the Pulsar Plus Controller which further extends the number of alarm relays and provides a larger display. • OSP cabinet and customer premise applications • Efficiency approaching 97% • High density power • 10 to 600A Systems at -48V • Flexible AC Input

CPS6000 TE Rectifiers The CPS6000 TE rectifiers are designed to operate in harsh temperature environments converting AC power to DC power. Integrated into the CPS6000 Power System, the Total Efficiency™ QS Series Rectifiers provide a battery reserve system with battery management features such as slope thermal compensation, low-voltage disconnect, battery high temperature alarm and shorted cell detection. Applications • Extended temp range • Analog load sharing • Digital Loop Carrier • Constant Power Operation • Customer Premise • Data networks • Front panel LED indicators • Indoor/outdoor...

Specifications (Cont.) ENVIRONMENTAL Operating Temperature Storage Temperature Power Derating Relative Humidity Audible Noise SAFETY AND COMPLIANCE NEBs Evaluated by independent NRTL test lab to Telcordia GR63 and GR1089-CORE, Issue 4 NEBs Level 3 Certified Zone 4 rated (all floor) CE mark to low Voltage Directive 2006/95/EC and EMC Directive 2004/108/E UL 609501-1 Recognized CSA C22.2 No. 60950-1-03 Certified Compliant to RoHS EU Directive 2002/95/EC OUTLINE DRAWINGS CPS6000 Cabinet Power System

CPS6000 Series 2 Controllers Pulsar Edge and Pulsar Plus System Controllers The CPS6000 Power System is compatible with several controllers. These controllers monitor and control system components including rectifiers, converters, and distribution modules via a multi-drop RS485 digital communications bus. System status, parameters, settings, and alarm thresholds can be viewed and configured from the controller’s front panel display or remote monitor ports. Assignment and configuration of alarm inputs and output relays can be performed from a laptop computer connected to a local port, or by...

Controller Feature Comparison FEATURE PULSAR EDGE Office Alarms - Form C Relays Binary Input Monitor Channels Battery Test / Reserve time prediction Battery Recharge Current Limit Battery Monitoring - Temperature Analog Temp Probes (Direct) Battery Monitoring - Mid String Voltage Battery Shunt Monitoring Audible Alarm Float and Boost Modes 10/100 Base-T Ethernet Port for LAN DHCP for Local Port Access SMTP Alarms by email / pager SNMP v2C Remote Monitoring Telnet / FTP (remote S/W upgrade) Multiple Security level user access Active Rectifier Management (ARM) Optional Modem External Alarm...

Ordering Information - CPS6000 Series 2 Systems CPS6000 is a -48Vdc power system that is based upon a 2U high (3.50 in./ 89 mm) shelf with 19” and 23” wide mounting options. CPS6000 is a vertical airflow system consisting of rectifiers, ringers, controller, battery monitoring and either shelf integrated or external distribution options. CPS6000 systems are easy to setup and operate. The controller can be configured using either the front panel display, a laptop computer connected to the local port, or remotely using the Ethernet connection. Battery management features and options include...

Series 2 Rear Feed, IEC C13 Receptacles Front, Dual Feed Line Cords Rear, Terminal Blocks for Individual, Single or Dual Feed Plant Systems Individual Dual Individual Dual Front, Terminal Blocks for Individual or dual feed Plant Systems, Individual Dual Individual Dual AC7 Rear AC Cords for Plant Systems. CPS6000 Cabinet Power System I www.gecriticalpower.com

4 load positions, 12 GMT fuses 3 Rear battery bulk, 1 Rear AUX position Battery Connections Single External Bullet Breaker Distribution Panel DCE1 20 Positions for 19" configuration / 26 Positions for 23" configuration Ratings: 300A output (300A discharge), 150A max breaker (75C Ambient) Configurable Battery Breaker Connections Configurable Load Breaker Connections id A+B = 36 far 23" shelves. Each position is ecnfigura Dual External Bullet Breaker Distribution Panel DCE2 40 Positions for 19" configuration / 52 Positions for 23" configuration Ratings: 300A output (300A discharge), 150A max...