- Products
- Catalogs
- News & Trends
- Exhibitions
MINI K
1 / 1 PageView full catalog
MINI K
Product catalog summary
Introduction
This document provides the original instructions for the MINI K machine, revised in 2011, in compliance with step 1.7.4 of the Machinery Directive 2006/42/CE. It is produced by G.B.C. Industrial Tools S.p.A., located in Cazzago San Martino, Italy.
This document provides the original instructions for the MINI K machine, revised in 2011, in compliance with step 1.7.4 of the Machinery Directive 2006/42/CE. It is produced by G.B.C. Industrial Tools S.p.A., located in Cazzago San Martino, Italy.
Machine Dimensions
The machine is available in three versions: Pneumatic, Electric, and Battery. The dimensions are as follows:
The machine is available in three versions: Pneumatic, Electric, and Battery. The dimensions are as follows:
- Pneumatic: A - 325 mm (12.79 inches), B - 300 mm (11.81 inches), Ø C - 67 mm (2.63 inches) with an optional Ø C of 60 mm (2.36 inches).
- Electric: A - 410 mm (16.14 inches), B - 300 mm (11.81 inches), Ø C - 67 mm (2.63 inches) with an optional Ø C of 60 mm (2.36 inches).
- Battery: A - 470 mm (18.50 inches), B - 300 mm (11.81 inches), Ø C - 67 mm (2.63 inches) with an optional Ø C of 60 mm (2.36 inches).
Technical Data
The technical specifications for each version are:
The technical specifications for each version are:
- Pneumatic: ID Locking range of 20 - 42 mm (0.78-1.65 inches), Idle Speed of 180 gg/min (Rpm), Max Chuck Torque of 6 Nm (6 bar) and 18 Nm (8 bar), Axial Feeding of 23 mm (0.90 inches), Pneumatic Motor Power of 0.59 Hp (435 W), Air Consumption of 615 Nl/min (21.7 cfm), Air Pressure of 6 ÷ 8 Bar (87 ÷ 116 psi), Air Hose Connection of 1/2 inch.
- Electric: ID Locking range of 20 - 42 mm (0.78-1.65 inches), Idle Speed of 305 gg/min (Rpm), Max Chuck Torque of 17 Nm, Axial Feeding of 23 mm (0.90 inches), Electric Motor Power of 720 W, Tension of 110 / 230 Volt, Frequency of 50 / 60 Hz.
- Battery: ID Locking range of 20 - 42 mm (0.78-1.65 inches), Idle Speed of 151 gg/min (Rpm), Max Chuck Torque of 30 Nm, Axial Feeding of 23 mm (0.90 inches), Electric Motor Power of 720 W, Tension of 18V.
Additional Specifications
All versions have a Max Acoustic Emission of 75 Db. The machine weights are 4.8 Kg for Pneumatic, 5.5 Kg for Electric, and 5.7 Kg for Battery.
All versions have a Max Acoustic Emission of 75 Db. The machine weights are 4.8 Kg for Pneumatic, 5.5 Kg for Electric, and 5.7 Kg for Battery.
See more
Catalog excerpts
MINI K Original Instructions—rev.2011— In compliance with the step 1.7.4 of the Machinery Directive 2006/42/CE G.B.C. Industrial Tools S.p.A. Via Sandro Pertini 41/43 - 25046 Cazzago San Martino (Bs) - Italia - Tel. + 39 030 7451154 - Fax. + 39 030 73 56 629
Open the catalog to page 1All G.B.C. Industrial Tools S.p.A. catalogs and technical brochures
NEW PRODUCTS 201819 Pages
BOILER STD1 Page
TC731 Page
MINI AUTO COMPACT1 Page
MINI C401 Page
Related Searches
- Cutting system
- Metal cut-off machine
- Metal sawing line
- Knife cutting system
- Beveling machine
- Rotary blade cutting system
- Tube sawing machine
- Electric chamfering machine
- Hand-held chamfering machine
- Tube chamfering machine
- Electric saw
- Bevel cutting machine
- Steel flange
- Pneumatic saw
- Tube cutter
- Pneumatic cut-off machine
- Pneumatic chamfering machine
- Electric cut-off machine
- Stainless steel flange
- Automated chamfering machine
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.