GATES BELT TENSION METER SONIC 550C ACCURATE AND CONSISTENT BELT TENSION MEASUREMENTS Do you need to establish a specific drive belt tension for your machine applications? Then reach for the Gates belt tension meter SONIC 550C and determine the degree of loads and tension of your belt installations immediately and with utmost precision. Applicable to a V-belt, a multi ribbed belt or a synchronous belt, the device analyses sound waves from the belt through the sensor and delivers you the accurate tension measurement without delay, which is essential for the optimum performance and reliability of your belt drives. Belt pretension data can be determined by using Gates DesignFlex™ Pro™ Drive design software, available on Gates.com. The Gates belt tension meter SONIC 550C ensures a smooth user experience including an easier reading of data thanks to its high definition OLED display. The device is compact, convenient to use and precise. PERFECT TENSION OUTPUT FOR OPTIMUM BELT PERFORMANCE AND RELIABILITY GATES.COM FEATURES + BENEFITS Suited for multi-ribbed, V- and synchronous belts Measuring accuracy: +/- 1% Double display possible (Newton and/or Hz) Auto shutdown after 5 min. of inactivity CE approved – RoHS compatible Auto gain control Compact model: 160 mm x 26 mm x 59 mm (H x D x W) 40 storage registers NEW OLED screen with optimised resolution IMPROVED frequency ranges: LOW (10-50 Hz), STANDARD (10-1000 Hz), HIGH

THE PERFECT PACKAGE FOR YOUR NEEDS THE NEW SONIC 550C TENSION METER IS AVAILABLE ALONG WITH ACOUSTIC SENSORS Standard package (PN 7420-00550) Additional cord sensor (PN 7420-00206) In each standard package, a flexible acoustic arm sensor is included. Easily connect the sensor to your Sonic 550C Tension Meter thanks to male – female connectors on both devices. Simple and practical! 1.000 mm. cord length Range: 10 – 5.000 Hz Additional inductive sensor (PN 7420-00212) 5 magnets are included to be used with the inductive sensor. 1.000 mm. cord length Range: 10 – 5.000 Hz Material: Neodynium Construction...