QUAD-POWER® 4 By using innovative minimal-stretch cord technology, Gates Quad-Power® 4 bandless V-belts are free of maintenance. Unlike conventional belts, the Quad-Power® 4 V-belt does not suffer from severe tension decay in the first hours after installation. So no run-in period nor any re-tensioning are required. This new generation of SERVICE FREE EPDM belts are designed to extend product life time eliminating costly downtime for re-tensioning, repair and replacement. Sections and nominal dimensions Section Length range HEAVY DUTY RAW EDGE, MOULDED NOTCH, NARROW SECTION V-BELT CONSTRUCTION Minimal-elongation polyester tensile cords allow for stable tension over the entire lifetime. Blue adhesion layer for an extra strong bonding of the tensile cords and the rubber compound. Quad-Power® 4 XPZ, XPA & XPB also available in PowerBand® version. Optimized notch form for reduced bending stress and improved efficiency. New generation EPDM rubber compound to ensure a long service life and a wearresistant belt under extreme temperatures. BENEFITS Energy efficiencies up to 98%. Less downtime. Fewer replacements. Higher performance. Wider temperature range. Halogen-free belt. A clear branding for ease of identification. Perfect fit on standard ISO/DIN V-pulleys and 3VX/5VX for RMA pulley grooves. REACH and RoHS 2 compliant. Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX. Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching. Temperature range: -50°C to +130°C. Ordering code XPZ600 XPZ - Section 600 - Datum length (mm) 3VX238 3VX - Section 238 - Effective length (inch 23.8) NOTE: For correct design and tensioning of the belt please use Gates DesignFlex® Pro™ Drive design software, available on www.Gates.com/Europe. Identification Durable blue marking indicating the belt type and white