Grounds Maintenance and Equipment Catalog 2016
776Pages

Commercial & Residential Lawn and Garden Equipment Farm & Agricultural Equipment

Boost Your V-Belt Sales. PoweRatecf"70" Belt Merchandiser This attractive and versatile display makes maximum use of available space. Provides self-service to customers so they can select the correct replacement belt. • Purchase the assortment and get the display for free. • Top 70 selling sizes are included. • Provides 78% coverage on applications in the up to 17 horsepower range. • Merchandiser includes racks, sign, and number tags plus Belt Length Measuring Tool, Applications Catalog and PoweRated Interchange Guide. • Display can be ordered without belts. Order Part #91234 (Charge Item)....

fade and color difference is not warranted. This warranty is void if the defect is caused by improper installation, use or maintenance of the Goods, or used for racing or competition. Goods are not warranted to comply with laws that may apply to uses of the Goods not stated in related materials, e.g., use in manned or unmanned aviation or life support applications. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. FAILURE TO REPLACE TIMING BELTS OR OTHER GATES PRODUCTS AS...

BladeRunner® Belts The BladeRunner belt is an aftermarket belt designed to fit specific applications. The BladeRunner belt provides exact OE fit, construction and performance when installed on leading lawn, garden and outdoor power equipment. • eets or exceeds the performance of the OE belt on the equipment that it is applied to, which M reduces costly downtime and labor associated with belt replacement. • tilizes Aramid Cord construction which has a higher tensile strength than steel. U • xact fit to ensure smooth engagement of clutch and reduced harshness of operation. E • arious...

Super HC® V-Belts Pioneered by Gates, these “narrow” cross-sections can transmit up to three times the horsepower of the classical cross-sections (A, B, C and D) in the same amount of drive space. Suitable for all industrial applications, particularly where space, weight and horsepower capacity are critical. • Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life. • Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without...

Heavy-Duty Fleet FleetRunner® Micro-V® Belts Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including ¾ and 1 ton pickups. • Belt of...

Heavy-Duty Fleet Green Stripe® Truck and Bus Series V-Belts Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to belt. • Special tensile cords give high stretch resistance. • Special notch design resists cracking while providing tensile member support during operation. • Oil and heat-resistant construction throughout. • Meets SAE J636b and SAE J637 specifications. offers Green Stripe Truck and Bus Series PowerBand V-belts for problem, heavyGates also duty, heavily vibrating applications requiring belt sets....

Accessory Belt Drive System XL® V-Belts Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise. • Fiber-loaded rubber stock puts more flexibility along the length of the belt, yet gives the belt greater lateral stability in the pulley. • Thermally active tensile cords for maintenance-free performance when properly installed and tensioned. • Form ground to ensure precise top width and sidewall dimensional control for proper fit...

Accessory Belt Drive System Century™ Series Micro-V® Dual-Sided Belts For replacing original equipment belts on serpentine drives that require a higher degree of efficiency when transmitting power. Designed for small diameter pulleys and for use with or without automatic tensioners. • V-ribbed on both sides of the belt. • Specially designed to resist wear and cracking due to overall reduced thickness in construction. • Broad coverage on unique applications. • Custom setup for Gates specialized solution kits for Serpentine drives that cause problems DriveAlign® Automatic Belt Tensioners...

Coolant Systems - Hose Hose Shelf Life Storage environment, along with rubber materials, can vary the shelf life limit. Shelf life is difficult to quantify as many variables affect the hose. Proper storage precautions can result in three to five years of shelf life. Beyond this time, there can be a significant service life decrease, depending on storage environment variables. Some variables include: Hose should be stored in a cool, dry area never exceeding +100°F (+38°C). If stored below freezing, pre-warming may be required prior to handling, testing and placing into service. Store hose in...

Coolant Systems - Hose Green Stripe® Vulco-Flex® Coolant Hose Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications. Excellent flexibility, yet collapse and kink resistant. Extra strength fabric reinforcement with helical steel wire spiral molded between tube and cover. Heat-resistant construction throughout. EPDM tube and neoprene cover for extended...