Fleet & Heaw-Dutv Applications
733Pages

Weatherly No. 400 Catalog No. 431-2030 Edition 2013 Supersedes FLEET + HEAVY DUTY APPLICATIONS Includes 1996 + Newer Applications for Med/HD trucks For 1995 + older Med/HD applications, see catalog #431-2030V

PIC GAUGE™ – ANOTHER BELT WEAR DIAGNOSTIC INNOVATION FROM GATES. Developed by the world’s leader in belt technology. Gates. Powering Progress™ Gates is the Original Equipment Supplier for Belts, Hose and Hydraulics to: AGCO MANUFACTURING AMERICAN DIESEL CORP ARCTIC CAT AUTOCAR LLC BLUE BIRD BUS BOBCAT COMPANY CLAAS OF AMERICA INC CARRIER CASE CORPORATION CATERPILLAR CLARK MATERIAL HANDLING CLUB CAR CHARLES MACHINE WORKS INC CNH COACH PARTS CUMMINS ENGINE DETROIT DIESEL DETROIT DIESEL CORP FMC CORPORATION FREIGHTLINER CORP GEHL COMPANY GILLIG CORPORATION HAYDEN HINO MOTORS MANUFACTURING USA...

Weatherly No. 400 Catalog No. 431-2030 Edition 2013 Supersedes Warning Be safe! Do not use Gates belts, pulleys or sprockets on any aircraft propeller or rotor drive systems or in-flight accessory drives. Those Gates products are not designed or intended for aircraft use. Caution Use Gates products only on applications specified in Gates literature. Install and maintain products according to the vehicle manufacturers’ recommended procedures and with recommended tools. Failure to follow these instructions could result in injury or property damage. Gates disclaims all liability due to failure...

Belts + Drive Systems Micro-V® Dual-sided Belts For replacing original equipment belts on serpentine drives that require a higher degree of efficiency when transmitting power. Designed for small diameter pulleys and for use with or without automatic tensioners. • V-ribbed on both sides of the belt. • Specially designed to resist wear and cracking. • Broad coverage on unique applications. XL® V-Belts Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt tightens on the drive as it gets hot. This results in improved belt performance by...

Green Stripe® Micro-V AT® Belts Long wearing fiber-loaded stocks with greater load-carrying capacity designed for demanding, heavy-service drives. Desogned for replacing original belts on serpentine drives and other heavy-duty V‑ribbed belt applications. • Special belt constructions eliminate belt noise, reduce tension loss and solve problem drive applications. • Extra heavy-duty construction resists cracking and wear. • Precision ground to assure optimum belt-to-pulley fit. • Special formation process for precise dimensional control. • Reinforced with stretch-resistant, thermally active...

Belts + Drive Systems Hi-Power® II Belts Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging. Suitable for all industrial applications, including v-flat drives. • Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life. • Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. • The Flex-Weave® Cover is a patented fabric construction for...

Belts + Drive Systems DriveAlign® Heavy-Duty Idler Pulleys Long-lasting pulleys built to endure the rigors of today’s heavy-duty, fleet and off-road equipment. • Superior bearings out perform OE Idler Pulleys. • Robust and high quality pulley materials to withstand contaminates. • New hardware included on some popular applications. • Built with precise dimensional tolerance to ensure proper fit and long lasting performance. • Built with corrosive-resistant coating to prevent rust and increase durability. Belt Wear and the Accessory Belt Drive System (ABDS) An important message on Belt Wear...

Industrial Belts Super HC® and Super HC® Molded Notch V-Belts Recommended for use on special drives where space and weight limitations are critical. These “narrow” cross-sections can transmit up to three times the horsepower of the classical cross-sections (A, B, C and D) in the same amount of drive space. Suitable for all industrial applications, particularly where space, weight and horsepower capacity are critical. • Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life. • Flex-bonded cords are strongly...

Water Pumps Gates offers a limited lifetime warranty and state-of-the-art manufacturing process. Gates water pumps are recognized in the industry for their durability and superior quality. Every Gates water pump is constructed with premium alloy materials and a 100% functional test of seals and bearings along with a 100% leakage test for both the casting and assembled water pump. We are commited to selling the highest quality new, never remanufactured, water pumps in the aftermarket. Our end goal is to provide our customers with worry-free operation for the life of their vehicle....

Hose + Systems Coolant Hose Shelf Life Storage environment, along with rubber materials, can vary the shelf life limit. Shelf life is difficult to quantify as many variables affect the hose. Proper storage precautions can result in three to five years of shelf life. Beyond this time, there can be a significant service life decrease, depending on storage environment variables. Some variables include: Hose should be stored in a cool, dry area never exceeding +100°F (+38°C). If stored below freezing, pre-warming may be required prior to handling, testing and placing into service. Store hose in...

Hose + Systems Coolant Branched Radiator Hose Molded to fit specific applications. Factory quality connections are durable and eliminate coolant leaks. • Engineered to resist electrochemical degradation – the leading cause of hose failure. • Heat and ozone resistant cover. ELECTROCHEMICAL • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications. RESISTANT • Temperature rating: -40°F to +275°F (-40°C to +135°C) in coolant hose applications. Note: Gates recommends replacing standard worm drive and spring loaded clamps with PowerGrip® SB Clamps each time a new coolant hose is...