Catalogs >
Gates Europe >
AT 1 Laser alignment

AT 1 Laser alignment
2Pages

Catalog excerpts

AT-1 LASER ALIGNMENT DEVICE THE PERFECT TOOL FOR PULLEY ALIGNMENT Noise, wear on pulleys, belts and bearings, vibrations and in the end … machine downtime may all be caused by improper pulley alignment. This can be prevented by using Gates’ AT-1 laser alignment device. A fast and accurate method to measure misalignment is offered by Gates’ unique laser alignment device, LASER AT-1. Mounted in a few seconds, the laser line projected onto the targets allows you to quickly ascertain and correct misalignment. It identifies parallel as well as angular misalignment between the pulleys and is suitable for pulley diameters of 60mm and larger. It can be used on both horizontally and vertically mounted machines. FEATURES + BENEFITS Suitable for multi-ribbed belts, V-belts and synchronous belts. For both horizontally and vertically mounted machines. Shows parallel and angular misalignment between the pulleys. Compact & lightweight tool: easy to handle by one operator. IMPORTANT NOTE! GATES AT-1 LASER ALIGNMENT DEVICE SHOULD NOT BE USED IN EXPLOSIVE RISK ARE

Open the catalog to page 1

AT-1 LASER PRODUCT SPECIFICATIONS CONSTRUCTION ABS plastics housing. Anodised aluminium back plate. 2 pieces magnet targets with adjustable centre line (PN 7401-10012). TEMPERATURE RANGE Laser class 2. CE approved. RoHS 2 compliant: the device complies with the European Directive (2002/95/EC) on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Parallel misalignment IMPORTANT NOTE! GATES AT-1 LASER ALIGNMENT DEVICE SHOULD NOT BE USED IN EXPLOSIVE RISK AREAS. Fleeting angle Fleeting angle Angular misalignment AT-1 LASER TECHNICAL...

Open the catalog to page 2

AT 1 Laser alignment 2Pages

Catalog excerpts

All Gates Europe catalogs and technical brochures

AT 1 Laser alignment
2Pages