video corpo

04_THE_WORLD_OF_COUPLINGS - 136 Pages

Add to MyDirectIndustry favorites
04_THE_WORLD_OF_COUPLINGS

Catalog excerpts

INTEGRATED FLUID POWER SOLUTIONS

 Open the catalog to page 2

iLOK™ COUPLING THE WORLD OF COUPLINGS MAXIMISES OPERATION UPTIME iLok™ is Gates’ answer to the traditional staple-lock coupling, specifically designed to increase safety and substantially reduce downtime when disconnecting and reconnecting the coupling, a key challenge when moving and re-assembling in longwall mining. Safe productivity Circumstances in longwall mines are harsh on miners and equipment alike. Traditional staple couplings become deformed and corroded, making it extremely challenging to replace damaged hose assemblies or to disconnect roof shields. This often results in workers...

 Open the catalog to page 3

A new coupling making longwall connections easier, faster and safer Boosted durability with Gates TuffCoat™ Xtreme® plating To further improve the lifetime of iLok™ couplings and adaptors in the highly corrosive mining environment, they are plated with Gates TuffCoat™ Xtreme®. This coating goes way beyond ISO 9227 standard requirements, offering 840 hours of red rust protection. Exactly what you need in extremely dusty and damp underground mining conditions. Flat wide-spread threads resist seizing due to corrosion or damage Seal-pack inside the female fitting is less prone to damage Cable...

 Open the catalog to page 4

COUPLING SELECTION TABLE

 Open the catalog to page 7

COUPLING SELECTION TABLE HOSE LENGTH EXTENDER COUPLINGS FOR WIRE & TEXTILE BRAID HOSE GlobalSpiral Plus

 Open the catalog to page 9

BSP BSP MBSPP BSP MBSPPBKHD    BSP FBFFX BSP BSPBJ JIC 37° FJX p. 239    p. 239    p. 240

 Open the catalog to page 10

DIN 24° FDHORX45    DIN 24° FDHORX90    DIN 24° MDH    METRIC MSP    METRIC DBJ NPTF FPX    NPTF MP    NPTF MPLN    NPTF FP    NPTF MPX

 Open the catalog to page 12

COUPLING SELECTION TABLE AGRICULTURAL VALVE QUICK-LOK HIGH QUICK-LOK HIGH COUPLINGS FOR WIRE SPIRAL BLASTING HOSE WaterBlast FERRULES COUPLINGS FOR PUSH-ON TEXTILE HOSE

 Open the catalog to page 13

EXPLANATION OF COUPLING NOMENCLATURE 4 Hose inside diameter in 1/16 inches GATES GLOBAL REFERENCE MegaCrimp® Coupling Thread size Male / female Soft seal ‘O’ ring Termination type EXPLANATION OF SYMBOLS Thread Banjo bolt size

 Open the catalog to page 14

THE WORLD OF COUPLINGS INTEGRATED FLUID POWER SOLUTIONS

 Open the catalog to page 15

COUPLINGS FOR WIRE SPIRAL HYDRAULIC HOSES

 Open the catalog to page 16

COUPLINGS FOR WIRE SPIRAL HYDRAULIC HOSES GLOBALSPIRAL MAXIMUM THE WORLD OF COUPLINGS BSP FBSPORX Female BSP 'O' ring swivel. 60° cone. Unless otherwise stated the coupling meets the pressure rating requirements of the respective international standard.

 Open the catalog to page 17

COUPLINGS FOR WIRE SPIRAL HYDRAULIC HOSES GLOBALSPIRAL MAXIMUM BSP MBSPP Male BSP parallel. 60° inverted cone. Unless otherwise stated the coupling meets the pressure rating requirements of the respective international standard.

 Open the catalog to page 18

COUPLINGS FOR WIRE SPIRAL HYDRAULIC HOSES GLOBALSPIRAL MAXIMUM JIC 37° FJX90 Female JIC swivel. 37° inverted cone. 90° swept elbow. Unless otherwise stated the coupling meets the pressure rating requirements of the respective international standard.

 Open the catalog to page 19

SAE FFORX45 Female SAE flat face 'O' ring swivel. 45° swept elbow. -size -24 -24 size is 28.0 MPa 14000 psi). /M: Medium drop per ISO 12151-1. SAE FLSAE 'O' ring flange. Code 61. D Details on flange kits see page 292. Unless otherwise stated the coupling meets the pressure rating requirements of the respective international standard.

 Open the catalog to page 20

COUPLINGS FOR WIRE SPIRAL HYDRAULIC HOSES GLOBALSPIRAL MAXIMUM THE WORLD OF COUPLINGS SAE FL45 SAE 'O' ring flange. Code 61. 45° swept elbow. Details on flange kits see page 292. /M: Medium drop per ISO 12151-3. SAE FL90 SAE 'O' ring flange. Code 61. 90° swept elbow. Details on flange kits see page 292. /S: Short drop per ISO 12151-3. SAE FLHCFM SAE 'O' ring flange with pre-installed monobloc. Code 62. Unless otherwise stated the coupling meets the pressure rating requirements of the respective international standard.

 Open the catalog to page 21

SAE FLHCFM45 SAE 'O' ring flange with pre-instafled monobloc Code 62. 45° swept elbow. SAE FLHCFM90 SAE 'O' ring flange with pre-installed monoblo Code 62. 90° swept elbow. SAE 'O' ring flange high-pressure. Code 62 Details on flange kits see page 292. Unless otherwise stated the coupling meets the pressure rating requirements of the respective international standard.

 Open the catalog to page 22

COUPLINGS FOR WIRE SPIRAL HYDRAULIC HOSES GLOBALSPIRAL MAXIMUMTHE WORLD OF COUPLINGS SAE FLH22 SAE 'O' ring flange high-pressure. Code 62. 22° swept elbow. Details on flange kits see page 292. /M: Medium drop per ISO 12151-3. SAE FLH30 SAE 'O' ring flange high-pressure. Code 62. 30° swept elbow. Details on flange kits see page 292. /M: Medium drop per ISO 12151-3. Unless otherwise stated the coupling meets the pressure rating requirements of the respective international standard.

 Open the catalog to page 23

SAE FLH60 SAE 'O' ring flange high-pressure. Code 62. 60° swept elbow. Details on flange kits see page 292. /M: Medium drop per ISO 12151-3. SAE FLH90 SAE 'O' ring flange high-pressure. Code 62. 90° swept elbow. Details on flange kits see page 292. /S: Short drop - M: Medium drop per ISO 12151-3. Unless otherwise stated the coupling meets the pressure rating requirements of the respective international standard.

 Open the catalog to page 24

COUPLINGS FOR WIRE SPIRAL HYDRAULIC HOSES GLOBALSPIRAL MAXIMUM THE WORLD OF COUPLINGS -24 size is 42.0 MPa 16000 psi). /Note: FLC flanges are designed with a thicker flange head. The 14.2 mm flange dimension is frequently found on Caterpillar equipment. This flange lets the user utilise the Caterpillar flange clamp halves where practical when he replaces the hose assembly. At the user's option, standard Code 62 flanges and flange clamp halves can be used in place of the Caterpillar flanges and flange clamp halves. The standard Code 62 flange head thickness is 12.7mm. FLC22 Caterpillar type...

 Open the catalog to page 25

FLC30 Caterpillar type 'O' ring flange. 30° swept elbow. -24 size is 42.0 MPa (6000 psi). /Note: FLC flanges are designed with a thicker flange head. The 14.2 mm flange dimension is frequently found on Caterpillar equipment. This flange lets the user utilise the Caterpillar flange clamp halves where practical when he replaces the hose assembly. At the user's option, standard Code 62 flanges and flange clamp halves can be used in place of the Caterpillar flanges and flange clamp halves. The standard Code 62 flange head thickness is 12.7mm. FLC45 Caterpillar type 'O' ring flange. 45° swept...

 Open the catalog to page 26

All Gates Europe catalogs and technical brochures

  1. wtb

    3 Pages

  2. PRO series

    2 Pages

  3. Laser AT-1

    2 Pages

  4. Predator

    4 Pages

  5. QUICK-LOK

    8 Pages

  6. Globalspiral

    35 Pages

  7. TWIN POWER®

    2 Pages

Archived catalogs

  1. SUPER FLEX

    4 Pages