video corpo

03_THE_WORLD_OF_HOSE
134Pages

{{requestButtons}}

Catalog excerpts

03_THE_WORLD_OF_HOSE - 2

INTEGRATED FLUID POWER SOLUTIONS

Open the catalog to page 2
03_THE_WORLD_OF_HOSE - 3

POLARFLEX® MEGASYS® PROGRAMME THE WORLD OF HOSE NOT JUST ANY LOW-TEMPERATURE HOSE PolarFlex® MegaSys® is a specialised type of hose designed to work in frigid temperatures without stiffening or cracking of the hose covers and tubes. Cracking can cause the hose tube and body to separate with leaks and even premature failure as a result. PolarFlex® rubbers and hose assemblies remain flexible and allow articulation and reliable operation even in the brittle cold. The new PolarFlex® MegaSys® combines this peace of mind with all the advantages of the MegaSys® programme

Open the catalog to page 3
03_THE_WORLD_OF_HOSE - 4

MegaSys® hoses that stay flexible and durable down to -57°C and up to 420 bar Cold weather operations demand a special breed of hose Quality products mean reliable performance During operations in arctic environments, hydraulic fluid goes from a cold sludge to a hot flow and that’s why it’s important that tube compounds tolerate extreme temperature swings and volumetric pressure changes. Standard hose tubes will absorb the hot hydraulic fluid, become spongy and crack. This could result in the release of particles damaging expensive hydraulic components such as pumps and valves. Not so the...

Open the catalog to page 4
03_THE_WORLD_OF_HOSE - 5

Hydraulic hose Engine hose OF HOSE Marine type approvals Hose type

Open the catalog to page 5
03_THE_WORLD_OF_HOSE - 6

[1] Indicates main component of compound (*) Application sign-off

Open the catalog to page 6
03_THE_WORLD_OF_HOSE - 9

THE WORLD OF HOSE INTEGRATED FLUID POWER SOLUTIONS

Open the catalog to page 9
03_THE_WORLD_OF_HOSE - 11

RECOMMENDED FOR TUBE REINFORCEMENT COVER TEMPERATURE RANGE STANDARDS COUPLINGS TYPE APPROVALS CHARACTERISTICS/BENEFITS ABRASION RESISTANT Extremely high pressure and high impulse hydraulic applications. NBR (Nitrile) based. Four (six for -20 to -32) alternating layers of spiralled, high tensile steel wire. CR (Chloroprene) based. MSHA approved. -40°C to +121°C. For water emulsions, etc. see Temperature Limits Table. Exceeds ISO 3862 R15. SAE 100R15. -6 to -20: GlobalSpiral; -24, -32: GlobalSpiral Maximum. DNV, GL, LR, BV and ABS. Up to 40% of EN 856 4SP/4SH bend radius at rated working...

Open the catalog to page 11
03_THE_WORLD_OF_HOSE - 12

HYDRAULIC HOSE CONSTANT PRESSURE Flame Resistant MSHA 2G-11C RECOMMENDED FOR TUBE REINFORCEMENT COVER TEMPERATURE RANGE STANDARDS COUPLINGS TYPE APPROVALS CHARACTERISTICS/BENEFITS Extremely high pressure and high impulse hydraulic applications. NBR (Nitrile) based. Four (six for -20 to -32) alternating layers of spiralled, high tensile steel wire. CR (Chloroprene) based. MSHA approved. -40°C to +121°C. For water emulsions, etc. see Temperature Limits Table. Exceeds ISO 3862 R13. EN 856 R13. SAE 100R13. -6 to -20: GlobalSpiral; -24, -32: GlobalSpiral Maximum. DNV, GL, LR, BV and ABS. Up to...

Open the catalog to page 12
03_THE_WORLD_OF_HOSE - 13

HYDRAULIC HOSE CONSTANT PRESSURE THE WORLD OF HOSE EFG4K Flame Resistant MSHA 2G-11C Extremely high pressure and high impulse hydraulic applications. Four alternating layers of spiralled, high tensile steel wire. CR (Chloroprene) based. MSHA approved. TEMPERATURE RANGE -40°C to +121°C. For water emulsions, etc. see Temperature Limits Table. COUPLINGS GlobalSpiral. TYPE APPROVALS 40% of EN 856 4SP bend radius at rated working pressure. Most flexible EN 856 R12 / SAE 100R12 hose in the industry. Superior flex impulse performance: tested to 1,000,000 impulse cycles at 50% of EN 856 R12 and SAE...

Open the catalog to page 13
03_THE_WORLD_OF_HOSE - 14

HYDRAULIC HOSE CONSTANT PRESSURE EFG3K Flame Resistant MSHA 2G-11C Extremely high pressure and high impulse hydraulic applications. Four alternating layers of spiralled, high tensile steel wire. CR (Chloroprene) based. MSHA approved. TEMPERATURE RANGE -40°C to +121°C. For water emulsions, etc. see Temperature Limits Table. -20: GlobalSpiral; -24 to -32: GlobalSpiral Plus. TYPE APPROVALS Up to 40% of EN 856 4SP bend radius at rated working pressure. Extremely flexible. Superior flex impulse performance: tested to 1,000,000 impulse cycles at 50% of EN 856 R12 and SAE 100R12 bend radii (except...

Open the catalog to page 14
03_THE_WORLD_OF_HOSE - 15

I 20HD-UHP HYDROSTATIC DRIVE £gs l68.0MPa (1680 BAR) BURST PRESSURE 1-1/4" (31 mm) Flame Resistant MSHA 2G-11C RECOMMENDED FOR TUBE REINFORCEMENT COVER TEMPERATURE RANGE STANDARDS COUPLINGS CHARACTERISTICS/BENEFITS Extremely high pressure hydrostatic drive applications. NBR (Nitrile) based. Four (six for -20) alternating layers of spiralled, high tensile steel wire. CR (Chloroprene) based. MSHA approved. -40°C to +121°C. For water emulsions, etc. see Temperature Limits Table. Gates proprietary. -10 to -20: Globa lSpiral. 40% of EN 856 4SP/4SH bend radius. Extremely flexible. HD-UHP hose...

Open the catalog to page 15
03_THE_WORLD_OF_HOSE - 16

HYDRAULIC HOSE CONSTANT PRESSURE M6K Flame Resistant MSHA 2G-11C High pressure hydraulic applications. Easy to route and to install in tight areas. Two braids of high tensile steel wire. NBR/PVC based. MSHA approved. to +100°C constant and +121°C intermittent. For water emulsions, etc. see Temperature Limits Table. Gates proprietary. COUPLINGS MegaCrimp®. TYPE APPROVALS 7 0% of EN 857 2SC and 50% of EN 853 2SN bend radius at rated working pressure. Superior flex impulse performance: tested to 600,000 impulse cycles. Meets or exceeds EN 857 2SC performance requirements. Lightweight. M6K hose...

Open the catalog to page 16
03_THE_WORLD_OF_HOSE - 17

HYDRAULIC HOSE CONSTANT PRESSURE THE WORLD OF HOSE M5K Flame Resistant MSHA 2G-11C High pressure hydraulic applications. Easy to route and to install in tight areas. Two braids of high tensile steel wire. NBR/PVC based. MSHA approved. to +100°C constant and +121°C intermittent. For water emulsions, etc. see Temperature Limits Table. Gates proprietary. COUPLINGS MegaCrimp®. TYPE APPROVALS 70% of EN 857 2SC and 50% of EN 853 2SN bend radius at rated working pressure. Superior flex impulse performance: tested to 600,000 impulse cycles. Meets or exceeds EN 857 2SC performance requirements....

Open the catalog to page 17
03_THE_WORLD_OF_HOSE - 18

HYDRAULIC HOSE CONSTANT PRESSURE M4K Flame Resistant MSHA 2G-11C pressure hydraulic applications. Easy to route and to install in extremely tight areas. Two braids of high tensile steel wire. NBR/PVC based. MSHA approved. to +100°C constant and +121°C intermittent. For water emulsions, etc. see Temperature Limits Table. COUPLINGS MegaCrimp®. TYPE APPROVALS 50% of EN 857 2SC and 40% of EN 853 2SN bend radius at rated working pressure. Alternative to spiral hoses in high pressure lines where flexibility is required. Superior flex impulse performance: tested to 600,000 impulse cycles. Meets or...

Open the catalog to page 18

All Gates Europe catalogs and technical brochures

  1. wtb

    3 Pages

  2. PRO series

    2 Pages

  3. Laser AT-1

    2 Pages

  4. Predator

    4 Pages

  5. QUICK-LOK

    8 Pages

  6. Globalspiral

    35 Pages

  7. TWIN POWER®

    2 Pages

Archived catalogs

  1. SUPER FLEX

    4 Pages