SW1
2Pages

RAILING SYSTEM SW1 APPLICATION This railing system is used in areas where directing of pedestrian traffic is necessary. The railings are typically used together with such elements as turnstiles, swing gates and other pedestrian traffic control devices. These railings are suitable for both indoor and outdoor installations. SW1 railing system is not to be used as safety railings e.g. on the balcony or in staircase. CONSTRUCTION Crossbars with dimensions determined by the customer can be prepared at request. For this purpose, drawings must be prepared showing dimensions A, B and C using the drawing presented on the next side. CONFIGURATION Railing system is equipped with basic elements enabling constructing of free configuration of rails depending on customer's needs. In case of non-typical solution, you are kindly requested to contact our sales department. Railing elements are made of ground finish stainless steel 1.4301 (EN 10088) Posts are made of ø50mm tubular elements with ground sockets and ø156mm cover plate. Posts are equipped with sockets for crossbars fitting at heights of 509 mm and 959 mm and with cover blanks imitating ground stainless steel. Crossbars are made of ø30mm tubular elements tucked into the socket in the post. ASSEMBLY METHOD Ground sockets have 4 fixing slots. It is recommended to assembly the posts using adhesive anchors e.g. of HILTI company. Crossbars are assembled by trimming to appropriate dimension (length), drilling of assembly slots and riveting using ø4mm rivets after placing of crossbars in appropriate sockets. Note! Adjusting of crossbars to desired dimension and drilling of slots in crossbars to be made at assembly premises. ______________________________________________________________________________ All rights reserved

A - dimension between posts' edges B - dimension between edges of ground sockets C - dimension between axes of posts Example of dimensions presentation: TECHNICAL PARAMETERS Post material: - ground finish stainless steel 1.4301 (EN 10088) Crossbar material: - ground finish stainless steel 1.4301 (EN 10088) STANDARD SYSTEM EQUIPMENT Posts are equipped with ground sockets with plate cover, fixing sockets and top cover blanks. Crossbars of standard or non-standard dimensions. Equipment covers 04mm fixing rivets for crossbars Note: standard equipment does not include assembly elements for...