Standard configuration Gasmet Industrial Computer Gasmet industrial computer is required to operate the analyser, to control the sampling system, translate measured and analysed concentrations and alarms to higher level automation and control systems. In essence, the Gasmet software (Calcmet) can be operated in any Windows computer. However, many typical continuous monitoring applications require analogue inputs and outputs, relay contacts, status input and output values, all of which can optionally be provided by adding desired expansion cards to the Gasmet industrial computer. The standard computer configuration provides analyser control via a serial port, watchdog support and remote control for service and troubleshooting purposes. Additional features including sampling system control, current and alarm outputs and multipoint sampling can be realized by adding suitable expansion cards to the computer. Normal configuration: Intel® Core™ i3-330E 2.13 GHz processor, 1 GB DDR3-SDRAM memory, 2 x 3.5” SATA HDD, RAID 1, Back-up hard disk (empty) and docking station, DVD-RW drive, USB modem, network card (2 pcs) Operating system: Windows 7 (32-bit) (English) Software included: Calcmet STD for Windows Watchdog support: Included Mouse: Optional Keyboard: Optional STREET ADDRESS: Pulttitie 8 A 1 00880 Helsinki, Finland

AdLink PCI cards: - Analogue output - Digital input / output - Relay output - Analogue input 8 x 4-20 mA / card 16 x input / 16 x output / card 8 / card 8 x 0-10 V / card (max. 8 cards) Display: DVI-I EMI protection / electrical safety Optional input / output expansion modules Built in weather proof casing or on DIN rail. CE label: According to EMI guideline Enclosure: Beckhoff: - Digital output - Digital input - Analogue output - Analogue input 8 x 0.5 A / module 8 / module 8 x 4-20 mA / module 4 x 4-20 mA / module, 4 x 0-10 V / module (max. 255 modules) ModBus, ModBus TCP/IP, Profibus,...