Gasmet HEATED SAMPLING LINES Gasmet Heated Sampling Lines Gasmet heated sampling lines are designed for continuous transportation of gaseous media. They are flexible, heatable, and are used to keep the sample gas in gas phase and prevent condensation. This is especially when measuring water soluble compounds such as SO2, NH3, HCl, etc. Basic specifications Options Power supply: Carrying hose: Operation temperature: Core: Temperature sensor: Thermal insulation: - Other operation temperatures - 115 VAC version (additional price per meter) - % inch tubing (additional price per meter) - PFA tubing (additional price per meter) - Integrated calibration gas tube (additional price per meter) - Plastic corrugated tube (additional price per meter) External protection: Power supply line: Circular connector: 230 VAC, 120 W/m Heated PTFE core 200 oC maximum 6/4 mm (OD/ID) PTFE, exchangeable NiCrNi (k-type) Finely pored rubber tube at 100 oC, thermally insulated silicone tube at 200/250 oC Polyamide braiding with silicon end caps One meter long cord with a 7-pole circular plug (standard) 1=phase, 3=neutral, 5(+), 6(-)=thermocouple, PE=protective earth Hirschmann CM06EA14S-61S or compatible Gasmet Technologies Oy shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. Should you find any errors, we would appreciate if you notified us. email: [email protected] web: www.gasmet.fi vat no: FIT9526395