gasmet_dx4040
2Pages

Add to favorites

{{requestButtons}}

Catalog excerpts

The Portable FTIR Gas Analyzer The Gasmet DX4040 analyzer combines Fourier transform infrared (FTIR) spectrometer, rhodium-gold coated sample cell, built-in sample gas pump and signal processing electronics in a compact unit. In battery use, operating time is 2.5 hours with one charge. AC power supply is also included. There is a filter for particulates inside the probe and no sample preparation is needed. The lightweight analyzer can be used with or without the durable Teflon coated backpack. The Gasmet DX4040 is designed for on-site measurements of different compounds (both organic & inorganic) at low concentrations in ambient air. Typical usage areas include industrial hygiene and emergency response situations. The communication between the analyzer module and the PDA is wireless (with Bluetooth protocol). In the standard configuration, concentrations of 25 gases of interest can be simultaneously monitored. Furthermore, with the optional Calcmet 4040 Professional software the analyzer can be connected to a laptop PC for extended analysis capability (e.g. identification of unknown compounds with library spectra). There are no consumable parts that would need replacing on regular basis. In addition, due to FTIR technology, the calibrations remain very stable. Hence no span calibrations are needed. Also, cross-interferences (i.e. interference from other gases) are automatically compensated in the analysis algorithm during the calculation of the results. To sum up, the Gasmet DX4040 provides a very cost-effective, easy-to-use solution for multicomponent gas analysis in ambient air. STREET ADDRESS: Pulttitie 8 A 1 00880 Helsinki, Finland

Open the catalog to page 1

Electrical connectors: General parameters Measuring principle: Performance: Fourier transform infrared, FTIR Simultaneous analysis of up to 25 gas compounds (PDA), 50 gas compounds with optional Calcmet software Typically < 120 s, depending on the gas flow and measurement time Digital Interface: Bluetooth protocol & RS-232 The analyzer is connected to a PDA with Bluetooth connection (RS-232 optional). The PDA provides the analysis results. Option: sample spectra transfer to laptop (PC) for additional analytical capabilities Operating temperature: Ambient temperature Gas inlet and...

Open the catalog to page 2

All Gasmet Technologies catalogs and technical brochures

1. 

   gasmet_application_note_container_measurements

   6 Pages

2. 

   compressed_breathing_air_monitoring

   3 Pages

3. 

   anesthetic_gases_point_monitoring

   2 Pages

4. 

   contaminated_site_measurements

   2 Pages

5. 

   hazardous_chemicals_and_materials_hazmat

   2 Pages

6. 

   carbon_sulfide_emissions_in_nickel_mining_operations

   2 Pages

7. 

   stack_testing_according_to_us_epa_methods

   2 Pages

8. 

   case_study_continuous_ftir_gas_analyzer_monitors_hospital_anesthetics

   2 Pages

9. 

   gasmet industrial computer

   2 Pages

10. 

    gasmet cems ii

    2 Pages

11. 

    gasmet cems ii e sampling unit

    2 Pages

12. 

    gasmet mercury monitoring

    3 Pages

13. 

    gasmet_cems

    2 Pages

14. 

    gasmet_oxygen_analyzer

    2 Pages

15. 

    Engine Emissions Monitoring System EEMS

    2 Pages

16. 

    Continuous Mercury Monitoring system (CMM)

    2 Pages

17. 

    In-Situ FTIR Gas Analyzer

    2 Pages

18. 

    FCX-Series FTIR Gas Analyzer

    2 Pages

19. 

    Portable Calibrator

    2 Pages

20. 

    gasmet_cems_ii

    2 Pages

21. 

    gasmet_cx4000

    2 Pages

22. 

    stack_testing

    2 Pages

23. 

    gasmet_portable_sampling

    2 Pages

24. 

    gasmet_dx4040_brochure_spread

    2 Pages

25. 

    greenhouse_gas_soil_flux_analysis

    6 Pages

26. 

    DX4015

    2 Pages

27. 

    gasmet_heated_sampling_lines

    1 Pages

28. 

    Portable Sampling Unit

    2 Pages

29. 

    gasmet_dx4000_web

    2 Pages