Catalogs >
Gardner Denver Thomas >
Vacuum pumps for table top steam autoclaves

Vacuum pumps for table top steam autoclaves
8Pages

Catalog excerpts

Vacuum pumps for table top steam autoclaves - 1

Vacuum pumps for table top steam autoclaves APPLICATION BROCHURE

Vacuum pumps for table top steam autoclaves - 2

Steam sterilization is one of the best methods to neutralize micro-organisms. For a safe sterilization process only saturated steam should be used. This is pure steam generated from boiling water. Saturated steam shows a firm temperature-/pressure-curve (see diagram below). For example to reach a steam pressure of 100 mbar (absolute) a temperature of 46 °C is required. This temperature/pressure relationship is also the key to a very efficient sterilization process. The lower the steam temperature and the corresponding pressure (vacuum) level the faster the sterilization cycle. THOMAS by...

Open the catalog to page 2

Vacuum pumps for table top steam autoclaves - 3

Steam sterilization with the fractionated pre-vacuum process Fractionated pre-vacuum process According to the preliminary European Norm prEN 13060-1..4 the fractionated pre-vacuum process is absolutely necessary to achieve the highest sterilization level possible, the so called class-B standard. The chamber is evacuated several times (air removal) while alternating with the intake of saturated steam. This job can be done with a vacuum pump enabling the pump to pass the Bowie-Dick test required by prEN 13060. In addition the vacuum pump provides the post-vacuum for the load drying phase of...

Open the catalog to page 3

Vacuum pumps for table top steam autoclaves - 4

Max. restart vacuum_Ambient pressure_Ambient pressure_Ambient pressure Electrical Data Motor type_ Nominal voltage11 Nominal speed_ Power consumption Motor insulation class Thermal switch General Data Ambient temperature_10 to 40 °C_10 to 40 °C_10 to 40 °C_ Dimensions (L x W x H)_125x61 x78 mm21_184 x 61 x 78 mm21_184x61 x 78 mm21 Material Head & chamber_PPS_PPS_PPS 1) All world voltages available 2) Without ventilator and tubing Flow Curves Flow [l/min] The information presented in this material is based on technical data and test results of nominal units. It is believed to be...

Open the catalog to page 4

Vacuum pumps for table top steam autoclaves - 5

Diaphragm Pump 2119 Flow Max. vacuum Pneumatic Data Description Part number Free flow Max. vacuum Max. restart vacuum 2119VCDU20 on request 19 l/min 91,4% Ambient pressure Electrical Data Motor type Nominal voltage Nominal speed Power consumption Motor insulation class Thermal switch General Data Ambient temperature Weight Dimensions (L x W x H) Material Head & chamber Diaphragm Valves Eccentric Configuration Aluminum with epoxy coat EPDM EPDM PM steel Series Flow Curves Flow [l/min] 20 2119VCDU20 The information presented in this material is based on technical data and test results of...

Open the catalog to page 5

Vacuum pumps for table top steam autoclaves - 6

Diaphragm Pump 8011 Flow Max. vacuum for ned ig Des es! clav Auto Pneumatic Data Description Part number Free flow Max. vacuum Max. restart vacuum Electrical Data Motor type Nominal voltage1) Nominal speed Power consumption Motor insulation class Thermal switch General Data Ambient temperature Weight Dimensions (L x W x H) Material Head & chamber Diaphragm Valves Eccentric Configuration GD-AlSi12 EPDM EPDM steel N/A GD-AlSi12 EPDM EPDM steel Parallel GD-AlSi12 EPDM EPDM steel Series All world voltages available Flow Curves Flow [l/min] 70 60 50 40 30 20 The information presented in this...

Open the catalog to page 6