THOMAS by Gardner Denver FEATURES BASE MODEL > Compact design > Quick change of cassette (SR10)/tubing (SR25, SR18) > Endless tubing possible (SR10) > Self priming > Safe to run dry > Maintenance free > Different tubing materials TYPICAL APPLICATIONS > Chemical industry > Medical industry > Laboratory and analysis technology > Food sector > Hygiene, desinfection > Industrial dishwasher > Glass washing

CHARACTERISTICS OVERVIEW Flow (ml/min) Operation mode Stand-by pump Page -Q 03 </) D W <V

Peristaltic Pumps SERIES SR10 • Speed reduction through frictional connection from the motor shaft to the rollers. • Very simple construction with the use of few parts only. • Easy change of the cassette. • Generally 3 rollers. • For short time operation only. • the pump is stored longer than three months, If we recommend to take the cassette off the motor shaft and store it separately. • Different motors available (DC, low cost DC, AC and stepper motor). Tubing Rollers Pump body • Peristaltic pump with QuiXchange system • Tube exchange without tooling within seconds • Spring loaded roller carrier...

SR18 Drive: Synchronous motor with sequencer Operation time Novoprene Norprene® PharMed BPT® Silicone Roller carrier Rolling band/lid DC motor AC motor AC synchronous motor Max. suction height Max. pressure height Max. ambient temperature Media temperature We recommend to roughen the shaft in axial direction when changing the cassette Norprene®, PharMed BPT® Norton Co. Reg. TM’s (sand paper grit size 150). 0 4 inner diameter on request

Tubing Novoprene Tubing PharMed BPT® Fixing Inner tubing 0 Flow2’12 V DC 24 V DC 12 V DC 24 V DC mm ml/min 20300512 20300542 straight 1.0 16 2) Note: The indicated values are average measured with water. The actual values depend on different parameters like quality and age of tubing, pressure of tubing beds, pressure ratios, viscosity. Please see page 4 for recommended running times and general data. Current consumption depending on the tubing diameter, at free flow and nominal voltage 12 V DC: 180 - 300 mA 24 V DC: 90 - 150 mA

Fixing Inner tubing 0 Flow2’mm ml/min 1) other tubing materials on request Current consumption depending on the tubing diameter, at free flow and nominal voltage 12 V DC: 180 - 300 mA 24 V DC: 90 - 150 mA 2) Note: The indicated values are average measured with water. The actual values depend on different parameters like quality and age of tubing, pressure of tubing beds, pressure ratios, viscosity. Please see page 4 for recommended running times and general data.

Peristaltic Pumps SR10/30 24 V DC with stepper motor For short time operation only Circuit board recommended for test purposes Flow (Winding Diagram) SR25 / F120 yellow red blue orange Item Nr. Motor pulse/rev rot.speed n1 n2 n3 n4 SR10/30 black brown yellow orange Features • speed pre-selection • clockwise, counter clockwise operation • instant priming • selective operating method cw / ccw connector open = cw setpoint indication Max. flow 2) ml/min (adjustable range 4 – 100%) 0.5 Part number – pump with circuit board Part number – pump without circuit board Part number – pump with circuit board...

12/24 V Direct current motor For short time operation only Tubing Novoprene Tubing PharMed BPT® 1) on request in white Option: Straight flange for flush mounting part number 20501 ... 12/24 V DC - with additional circuit board (on request) Current consumption depending on the tubing diameter, 2) Note: The indicated values are average measured with water. at free flow and nominal voltage 12 V DC: 0.4 - 0.54 A The actual values depend on different parameters like quality and age of 24 V DC: 0.2 - 0.27 A tubing, pressure of tubing beds, pressure ratios, viscosity. Please see page 4 for...

Spare parts SR10 series

230 V/50 Hz, synchronous gear motor Suitable for continuous running Tubing QuiXchange Note: The indicated values are average measured with water. Options: mounting clip Art. Nr. 29027360 The actual values depend on different parameters like quality and compression fitting Art. Nr. 29027298 age of tubing, pressure of tubing beds, pressure ratios, viscosity. Please see page 4 for recommended running times and general data.

SR25, 10 to 80 rpm Direct current motor SR25 -170 rpm13 Direct current motor Bore pattern to fit in a housing see page 14. Tubing Novoprene N 1.6 x 1.6 mm Part number 12 V Part number 24 V N 3.2 x 1.6 mm Part number 12 V Part number 24 V N 4.1 x 1.6 mm Part number 12 V Part number 24 V N 4.8 x 1.6 mm Part number 12 V Part number 24 V Tubing Silicone S 2.0 x 1.0 mm Part number 12 V Part number 24 V S 3.0 x 1.5 mm Part number 12 V Part number 24 V S 4.0 x 1.5 mm Part number 12 V Part number 24 V S 5.0 x 1.5 mm Part number 12 V Part number 24 V Electrical Data Motor Direct current motor 2025......

230 V/50 Hz, shaded pole motor For short time operation only Bore pattern to fit in a housing see page 14. Nominal speed Tubing Novoprene Flow1’ ml/min Tubing Silicone Flow1’ ml/min 1) Pump with counter bearing 2025... Stock programme Material of tubing connectors: Tubing Silicone: for all 0 PVC Note: The indicated values are average measured with water. The actual values depend on different parameters like quality and age of tubing, pressure of tubing beds, pressure ratios, viscosity. Please see page 4 for recommended running times and general data.

Flow 0.2 - 14 ml/min SR25, 1 to 10 rpm Synchronous motor o c E E c 00 c O in c a) Bore pattern to fit in a housing o Nominal speed Electrical wiring: blue Material of tubing connectors: 2) Note: The indicated values are average measured with water. Tubing Novoprene: 0 1.6/3.2 mm - PVC The actual values depend on different parameters like quality and 0 4.1/4.8 mm - PP age of tubing, pressure of tubing beds, pressure ratios, viscosity. Please see page 4 for recommended running times and general data.