*mydirectindustry

Diaphragm Pumps

Product catalog summary

Overview: The document details specifications and data for Thomas diaphragm pumps, specifically models 7006, 7010, 7011, 7015, and 7006 DC. These pumps are oil-less, maintenance-free, and suitable for pressure or vacuum applications, characterized by low noise levels, long lifespan, and a variety of material options.

Features: The pumps are designed to operate smoothly with minimal noise and maintenance. They are tightly sealed and available in various materials to accommodate different applications.

Typical Applications: Suitable for medical devices, analysis, air collectors, inhalators, level surveillance, and autoclaves.

General Specifications: Operating ambient temperature range is 15 to 40 °C, with media temperatures up to 60 °C. Maximum pressure is 2.5 bar, and maximum vacuum is 85%.

Electrical Data: Available with permanent magnet, capacitor, and brushless motors, operating at nominal voltages of 12/24 V DC, 115 V/60 Hz, and 230 V/50 Hz. Power consumption varies, with some models using up to 67 W.

Pneumatic Data: Maximum flow rates range from 7.5 l/min to 18.0 l/min, with intermittent duty at 2.5 bar and continuous pressure at 0.8 bar.

Materials and Options: Wetted parts include Polyarylamide pump heads and EPDM diaphragms, valves, and O-Rings. Options include PPS, FPM, and PTFE (FFPM).

Model Key and Configuration: Provides a model key for identifying configurations, including eccentric type, diaphragm, valves, O-Ring, and motor type. Configurations include parallel and series setups.

Flow Curves and Performance: Flow curves illustrate the relationship between flow rate, vacuum, and pressure, with performance data measured at 50 Hz and a noted 20% increase at 60 Hz.

Important Notes: Users are responsible for determining product suitability for specific applications. Thomas disclaims liability for the information provided.

Specifications: Includes pneumatic and electrical data, general characteristics, and material composition. Emphasizes user responsibility for product suitability and disclaims liability from Thomas.

Recommendations: Users should specify inlet/outlet ports when ordering and consider configuration based on application needs. Material options for wetted parts are suggested to suit different media.

Disclaimer: Information is based on nominal data and test results. Thomas does not assume liability for the use of this information.

Catalog excerpts

Diaphragm Pumps FEATURES TYPICAL APPLICATIONS • Oil-less • Medical devices • Maintenance free • Analysis • Smooth running • Air collector • Low sound level • Inhalators • Long lifetime • Level surveillance • Sealed tight • Autoclaves • Large choice in material

Open the catalog to page 1

Diaphragm Pump 7006 DC 7,5 l/min 2,5 bar 85 % Drawing 15798 Inches are shown in ( ) Flow Max. pressure Max. vacuum Pneumatic Data Description Part number Max. flow Max. intermittent duty Max. continuous pressure Max. restart pressure Max. vacuum Max. continuous vacuum Max. restart vacuum General Data Ambient temperature Media temperature Weight Port direction Electrical Data Motor type Nominal voltage Nominal speed Current consumption Starting current Power consumption Motor insulation class Protection class – Indicate inlet/outlet ports when ordering Wetted parts Pump head Diaphragm, valves,...

Open the catalog to page 2

Diaphragm Pump 7006 AC 7,5 l/min 2,5 bar 85 % Drawing 15803 Inches are shown in ( ) Flow Max. pressure Max. vacuum Pneumatic Data Description Part number 230 V/50 Hz Max. flow Max. intermittent duty Max. continuous pressure Max. restart pressure Max. vacuum Max. continuous vacuum Max. restart vacuum General Data Ambient temperature Media temperature Weight Port direction Electrical Data Motor type Nominal voltage Nominal speed Current consumption Starting current Power consumption Motor insulation class Protection class Thermal switch – Indicate inlet/outlet ports when ordering Wetted parts Pump...

Open the catalog to page 3

Diaphragm Pump 7006 AC 9,0 l/min 2,5 bar 85 % Drawing 15799 Inches are shown in ( ) Flow Max. pressure Max. vacuum Pneumatic Data Description Part number – Indicate inlet/outlet ports when ordering Standard port: – “A” Max. flow Max. intermittent duty Max. continuous pressure Max. restart pressure Max. vacuum Max. continuous vacuum Max. restart vacuum 9,0 l/min 2,5 bar 0,8 bar Ambient pressure* 85 % 85 % Ambient pressure* 70060051 7,5 l/min 2,5 bar 0,8 bar Ambient pressure* 85 % 85 % Ambient pressure* Electrical Data Motor type Nominal voltage Nominal speed Current consumption Starting current...

Open the catalog to page 4

Diaphragm Pump 7006 BLDC 10,0 l/min 2,5 bar 85 % Drawing 70060200MZ-0 Inches are shown in ( ) Flow Max. pressure Max. vacuum Pneumatic Data Description Part number Max. flow Max. intermittent duty Max. continuous pressure Max. restart pressure Max. vacuum Max. continuous vacuum Max. restart vacuum Electrical Data Motor type Nominal voltage Nominal speed Current consumption Starting current Power consumption Motor insulation class Protection class General Data Ambient temperature Media temperature Weight Port direction Wiring diagram Function Pin 1 V Supply Pin 2 Ground Pin 3 Speed Control Control...

Open the catalog to page 5

Diaphragm Pump 7006ZP/ZVR DC 15,0 l/min 2,5 bar 95 % Drawing 15763 Inches are shown in ( ) Flow Max. pressure Max. vacuum Pneumatic Data Description Part number Max. flow Max. intermittent duty Max. continuous pressure Max. restart pressure Max. vacuum Max. continuous vacuum Max. restart vacuum General Data Ambient temperature Media temperature Weight Port direction Configuration Electrical Data Motor type Nominal voltage Nominal speed Current consumption Starting current Power consumption Motor insulation class Protection class – Indicate inlet/outlet ports when ordering Wetted parts Pump head...

Open the catalog to page 6

Diaphragm Pump 7006ZP AC 14,0 l/min 2,5 bar 85 % Drawing 15983 Inches are shown in ( ) Flow Max. pressure Max. vacuum Pneumatic Data Description Part number 230 V/50 Hz Max. flow Max. intermittent duty Max. continuous pressure Max. restart pressure Max. vacuum Max. continuous vacuum Max. restart vacuum General Data Ambient temperature Media temperature Weight Port direction Configuration Electrical Data Motor type Nominal voltage Nominal speed Current consumption Starting current Power consumption Motor insulation class Protection class Thermal switch – Indicate inlet/outlet ports when ordering...

Open the catalog to page 7

Diaphragm Pump 7006ZP AC 13,5 l/min 2,5 bar 95 % Drawing 70060075-A Inches are shown in ( ) Flow Max. pressure Max. vacuum Pneumatic Data Description Part number 230 V/50 Hz Max. flow Max. intermittent duty Max. continuous pressure Max. restart pressure Max. vacuum Max. continuous vacuum Max. restart vacuum 7006ZVDP/2,3/E/AC 70060075 13,5 l/min 2,5 bar 0,8 bar Ambient pressure 85 % 85 % Ambient pressure Electrical Data Motor type Nominal voltage Nominal speed Current consumption Starting current Power consumption Motor insulation class Protection class Thermal switch General Data Ambient temperature...

Open the catalog to page 8

Diaphragm Pump 7006ZP/ZVR BLDC 18,0 l/min 2,5 bar 95 % Drawing 70060201MZ-0 Inches are shown in ( ) Flow Max. pressure Max. vacuum Pneumatic Data Description Part number Max. flow Max. intermittent duty Max. continuous pressure Max. restart pressure Max. vacuum Max. continuous vacuum Max. restart vacuum Electrical Data Motor type Nominal voltage Nominal speed Current consumption Starting current Power consumption Motor insulation class Protection class General Data Ambient temperature Media temperature Weight Port direction Configuration 95 % 95 % Ambient pressure* Wiring diagram Function Colour...

Open the catalog to page 9

Diaphragm Pump 7010 DC 6,5 l/min 2,2 bar 73 % Drawing 13296 Inches are shown in ( ) Flow Max. pressure Max. vacuum Pneumatic Data Description Part number Max. flow Max. intermittent duty Max. continuous pressure Max. restart pressure Max. vacuum Max. continuous vacuum Max. restart vacuum General Data Ambient temperature Media temperature Weight Port direction Electrical Data Motor type Nominal voltage Nominal speed Current consumption Starting current Power consumption Motor insulation class Protection class – Indicate inlet/outlet ports when ordering Wetted parts Pump chamber Pump head Diaphragm,...

Open the catalog to page 10

Diaphragm Pump 7010 AC 5,5 l/min 2,3 bar 73 % Drawing 13294 Inches are shown in ( ) Flow Max. pressure Max. vacuum Pneumatic Data Description Part number 230 V/50 Hz Max. flow Max. intermittent duty Max. continuous pressure Max. restart pressure Max. vacuum Max. continuous vacuum Max. restart vacuum General Data Ambient temperature Media temperature Weight Port direction 7010VD/2,2/V/AC 70102532 5,5 l/min 2,3 bar 1,2 bar Ambient pressure* 73 % 73 % Ambient pressure* Electrical Data Motor type Nominal voltage Nominal speed Current consumption Starting current Power consumption Motor insulation...

Open the catalog to page 11

Diaphragm Pumps

Diaphragm Pumps

Catalog excerpts

All Gardner Denver Thomas catalogs and technical brochures

Archived catalogs