Catalogs >
Gardner Denver Thomas >
Accessories for Vacuum Pumps & Compressors

Accessories for Vacuum Pumps & Compressors
12Pages

Catalog excerpts

Accessories for Vacuum Pumps & Compressors - 1

• Pressure Measuring Instruments • Pressure Switches • Pressure Relief Valves • Vibration Dampers • Silencers • Intake Filters • Explosion Suppression • Threaded Connectors • Tube Connectors THOMASby Gardner Denver

Open the catalog to page 1

Accessories for Vacuum Pumps & Compressors - 2

Instrument with operating instructions, does not include carrying case and accessories Includes carrying case and accessories: • PVC tube 4 mm x 2mm x 1m_ Interface converter for PC hook-up with 24/9-pole adapter and installation CD

Open the catalog to page 2

Accessories for Vacuum Pumps & Compressors - 3

Diaphragm Pressure Switch MB 40 The diaphragm pressure switch MB 40 is available for overpressure and negative pressure. The standard version has one micro switch with on, off or switch-over capability. The diaphragm pressure switch can be built with a second micro switch. Different springs are required for different pressure ranges. Other materials are available for special requirements. Standard materials in contact with the medium Diaphragm Plunger Plastic parts Spring FKM (Viton)® Brass PA Stainless steel The basic adjustment is by means of a pressure disc, against which the lever of...

Open the catalog to page 3

Accessories for Vacuum Pumps & Compressors - 4

Under – Over Pressure Valve: UVS 100 Bypass valve The bypass and pressure control valve UVS 100 is a servo-valve. The valve can also be used as a bypass. (Especially when mounted directly onto the pump) It is suitable for applications with gas flows of up to 10 l/min. Different springs are required for different pressure ranges. Other materials are available for special requirements. Standard materials in contact with the medium Diaphragm Plastic parts The adjustment is by means of an adjustment screw in the middle of the valve. The spring force is therefore regulated which keeps the bleed...

Open the catalog to page 4

Accessories for Vacuum Pumps & Compressors - 5

Check valve Part number_29021134_ Check valve for vacuum and pressure up to 0.9 bar. An outstanding feature of the check valve is that even with a pressure difference of 50 mbar the valve is very tight. The valve has tube connectors (0 3,5 mm) on both sides. Housing plastic, Elastomer EPDM Connection 4 mm suitable for diaphragm pump series 2002 to 5002 rotary vane pump series G 01 and 02 Push-on filter Push-on filter_Pump type_ The push-on filter is for the suction of air, but also reduces the suction noise. In a transparent plastic housing there is a foam filter. The air is sucked in...

Open the catalog to page 5

Accessories for Vacuum Pumps & Compressors - 6

Suction filter for pumps and compressors up to 60 l/min Red PVC pipe, filled with mineral wool or cotton. In different designs as inline filter with G 1/8” threads (female) on both ends, or as suction filter with a thread on one end and a bore on the other side. Different plastic tubing connectors are available. Material: red PVC tubing – circumference 40 mm with vacuum-tight glued ends. Material: red PVC pipe, diameter 40 mm, with caps cemented vacuum tight. Resonance silencer Deflection pipes within the silencer help to significantly reduce the noise level of compressors and diaphragm...

Open the catalog to page 6

Accessories for Vacuum Pumps & Compressors - 7

Stainless steel Part number 42001004 The detonation guard is used in piping and prevents an exit of a potential flame while extracting gases; for example from the measuring cell of analytical systems. Design Two fire arrestors contained within a stainless steel or brass housing prevent an exit of the flame from the closed system. Technical Data Suitable for media listed under explosion group II A Operating pressure maximum 1.1 bar abs (100 mbar overpressure) Maximum temperature 60 °C Connection thread G 1/4“ Stainless steel Part number 49004087 The detonation guard DS21 is used...

Open the catalog to page 7

Accessories for Vacuum Pumps & Compressors - 8

PLASTIC CONNECTORS - barbed PLASTIC CONNECTORS - threaded Adapters and threaded connectors for the 8009 series - plastic Adapters and threaded connectors for the 8009 series - metal thread adapter 1/4 x 28 UNF/G 1/8” inside long Double nipple Tubing with thickening end 1/4 x 28 UNF/NW 4 x 10 METAL for soft tubing Inlet0 - outletO / thread size Metal bright/nickel plated in mm 29022574 Threaded nozzle 8 - G 1/8” Counter bore Brass nickel plated 5,5 mm 29022550 Threaded nozzle8 - G 1/8”Brass nickel plated 29023110 Ring (piece)for tube 8 x 3 322M - 1/8” - 1/8”Brass nickel plated...

Open the catalog to page 8

Accessories for Vacuum Pumps & Compressors - 10

The top of the condensate trap (thread size G 3/4”) is the same for all models. Due to different heights the sight gauges also have different volumes. The top is equipped with a hose connector that protrudes into the condensate tank. Condensate within an air stream is withheld by inserting a tube that reaches the bottom of the respective tank. Some of the sight gauges have threaded connectors at the bottom. This enables drainage of the tank via a separate valve or pump. When filled with Silicate, the condensate trap can also be used as an air dryer.

Open the catalog to page 10